Design of Alternating Current Charging Spot Control System for Electric Vehicle
Journal Title: 河南科技大学学报（自然科学版） - Year 2016, Vol 37, Issue 3
Abstract
By analyzing the system structure and working principles of alternative current( AC) charging spot,the control system of AC charging spot for electric vehicle was designed based on STM32 processor. The basic functions and charging process states of AC charging interface were elaborated. The design of control pilot circuit and charing state acquisition circuit was completed. The pulse width modulation( PWM) module and the analog to digital converter( ADC) module were set by the software. The functions of charging process control pilot,connection confirmation,identification of the maximum current of charging interface,and the real-time acquisition of charging connection state were realized. The test results indicate that the system has good stability.
Authors and Affiliations
Kun XU, Ziang ZHOU, Dingyun WU, Wenbo GENG, Xiangdong LI
Keywords
Related Articles
- EP ID EP461281
- DOI 10.15926/j.cnki.issn1672-6871.2016.03.011
- Views 70
- Downloads 0
Electromigration Microstructure and Properties of Sn2.5Ag0.7Cu0.1RE/Cu Solder Joints
The effect of temperature on electromigration microstructure and properties of Sn2. 5 Ag0. 7 Cu 0. 1 RE/Cu solder joints was investigated. With the ambient temperature rising from 100 ℃ to 140 ℃, and the power on time ex...
Effect of Different Holding Time on Tribological Properties of AT13 Coating
Plasma spraying technology was utilized to deposit Al2 O3-Ti O2 coatings on 20 steel samples. The prepared coating was heat-treated at 500 ℃ for 1 h, 3 h and 5 h. The friction and wear performance of coatings were tested...
Study of Pavement Performance of Car Tyre Rubber Asphalt Mixtures in Extrusion Method
In this paper, the mixing rubber asphalt was prepared by car tire rubber powder which was made in the double screw cold extrusion, and the gradation designs of the SMA-13 rubber asphalt mixture were made.Based on experim...
Preparation and Conductivity of Polymer Decorated Graphene Film
1
Evolution of A Nonlocal Planar Convex Curve
For the evolution problem of curve influenced by external forces, the evolution of a new nonlocal planar convex curve was studied. The convexity of the evolution curve was kept, and the area of the region surrounded by t...