DESIGN OF MICRO POWER LIQUID LEVEL TRANSMITTER BASED ON C8051F410 CHIP SYSTEM
Journal Title: Topics in Chemical & Material Engineering (TCME) - Year 2018, Vol 1, Issue 1
Abstract
This paper introduces a method for designing a micropower smart level transmitter based on the C8051F410 system-on-chip. The internal AD/DA module is combined with peripheral circuit to complete the collection of voltage and transmission of 4-20mA current. And LCD segment liquid crystal is driven directly by MCU pin to display the current level. And Bubble filtering is used to stabilize the sampling and transmission values. This micro power system is powered by 24V DC power supply and its working current is under 2mA. The system has two ranges (0- 20cm, 0-50cm), and gives the actual measured data records of the two ranges. It also analyzes the causes of measurement errors and offers corresponding improvement measures. The design scheme of the system has some reference for designing industrial instrument
Authors and Affiliations
Liu Qi, Li Baohua, Wang Ying, Liang Kai
Keywords
Related Articles
- EP ID EP414298
- DOI 10.26480/icnmim.01.2018.176.178
- Views 67
- Downloads 0
SYNTHESIS AND CHARACTERIZATION OF EPOXY-MODIFIED WATERBORNE UNSATURATED POLYESTER AND THEIR USE IN FIBER SIZING AGENTS
Epoxy-Modified Waterborne unsaturated Polyester (WUP) were synthesized by phthalic anhydride, dipropylene glycol, maleic anhydride, epoxy resin, methyl tetrahydro phthalic anhydride and triethylamine. The chemical struct...
SLUDGE AUTOMATIC RECOVERY SYSTEM IN THE STEEL SEDIMENTATION POND
A lot of sludge will be produced in steel and other industrial production. The precipitation of iron sludge will be recycled again after treatment. In order to make a voluntary recall at a certain depth. According to Tan...
STUDY ON ADSORPTION PROPERTY OF MODIFIED DIATOMITE AGAINST CU2+ IN WASTEWATER
The performance of adsorption for Cu2+ was carried out with Polyacrylamide modified diatomite as adsorbent. The experimental results show that the addition amount of modified diatomite, the time of adsorption and the ini...
STUDY OF PREPARATION AND PHOTOLUMINESCENCE PROPERTY OF MOLYBDATE PHOSPHORS FOR WHITE LED
Eu3+ doped SrMoO4 phosphors were synthesized through the high-temperature solid-state reaction method and characterized with X-ray diffraction, photoluminescence emission and photoluminescence excitation spectra. The col...
ANALYSIS OF PERFORMANCE OF THE NEW TYPE OF FOUR EQUAL OF THE INJECTION ONLINE PRESSURE SEALING FIXTURE
Taking the leakage of steel pipe welding neck flanges with raised face as the research object, the structural characteristics of the traditional fixture and new type of four equal fixture were investigated, and the mecha...