Design of power system stabilizer for damping power system oscillations
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2017, Vol 12, Issue 1
Abstract
The problem of the poorly damped low-frequency (electro-mechanical) oscillations of power systems has been a matter of concern to power engineers for a long time, because they limit power transfers in transmission lines and induce stress in the mechanical shaft of machines. Due to small disturbances, power systems experience these poorly damped low-frequency oscillations. The dynamic stability of power systems are also affected by these low frequency oscillations. With proper design of Power System Stabilizer (PSS), these oscillations can be well damped and hence the system stability is enhanced. The basic functions of the PSS is to add a stabilizing signal that compensates the oscillations of the voltage error of the excitation system during the dynamic/transient state, and to provide a damping component when it’s on phase with rotor speed deviation of machine. Studies have shown that PSS are designed to provide additional damping torque, for different operation point normal load, heavy load and leading to improve power system dynamic stability.
Authors and Affiliations
Ahmed Mohammed. Ishag, Eisa B. M. Tayeb
Keywords
Related Articles
- EP ID EP388997
- DOI 10.9790/1676-1201011217.
- Views 135
- Downloads 0
Comparative analysis of various asymmetrical configurations of cascaded H-Bridge multilevel converter
The main objective of asymmetrical multilevel converter configuration is to achieve quality form of AC voltage and current by increasing the levels of output voltage. This paper mainly investigate the pro’s and cod’s of...
A Detuning Study of a Miniaturized PIFA Antenna inside the Human Thorax Model
Nowadays, the increasing demand for implantable medical devices (IMD) has required the design of efficient invasive antennas. However, designing an antenna operable in a biological layer is actually an extremely challeng...
Robust H2 Controller Design for Damping Power System Oscillations
This paper presents robust H2 controller design for damping power system oscillations. The proposed controller uses full state feedback. The feedback gain matrix is obtained as the solution of a linear matrix inequality...
Performance Comparison of Power Quality Evaluation Using Advanced High Resolution Spectrum Estimation Methods
Most of the conventional methods of power quality assesment in power systems are almost exclusively based on Fourier Transform that suffer from various inherent limitations. First limitation of an FFT based method is tha...
Review of HVDC Circuit Breakers Topologies.
Voltage Source Converter-High Voltage Direct Current (VSC-HVDC) is the most efficient and reliable method for electrical power transmission over long distances. The greatest challenge with VSC-HVDC system is that short-c...