Designe of Multi-Parameter Water Quanlity Sensor
Journal Title: 河南科技大学学报(自然科学版) - Year 2019, Vol 40, Issue 4
Abstract
In order to simplify the transmission line of water quality sensor and improve the measurement accuracy of conductivity and pH parameters, single-core cable structure, six-layer stacking mode and single-end input mode were used to optimize the design. The analysis results show that the single core cable structure transmits data through the power line when supplying DC power for the sensor. The six-layer plate has more excellent and stable noise suppression ability. When using single-ended mode, the working electrode of the p H sensor should to be connected to the high impedance input terminal, and the equipotential point calibration method is adopted to calibrate the pH sensor value.
Authors and Affiliations
Guanghua WEI, Xueliang ZHAO, Kang LI, Qingjia MENG, Shuangbao HAN
Calculation of Permanent Deformation of Cylindrical Roller Bearings under Overload Condition
In order to solve the overload problem of the operation of aerospace bearing,the contact stress and strain formula in the elastic and plastic stage of cylindrical roller bearing was given based on elastic-plastic mechani...
Design and Control of Grid-connected Inverter Based on Split-capacitor Passive Damping
In order to solve the problems of resonance in three phase grid-connected inverter control with loop capacitor loop( LCL) filter,a split-capacitor passive damping method and parameter design were proposed by combining th...
Tandem Type Electro-Hydraulic Compound Braking System and Hydraulic Control
A tandem type structure of electro hydraulic composite braking system was designed to realize electronic hydraulic brake ( EHB) , with two operating modes. Based on the logical threshold control, the hydraulic control mo...
Design of Embedded Intelligent Vision System
In view of the high complexity of image recognition algorithm and poor robustness of present embedded vision system, the embedded intelligent vision system was proposed. The advanced RISC machine ( ARM) Cortex-A53 ( Allw...
Oxidation Removal Experiment of As2O3 in Flue Gas
Taking Fenton reagent as the absorbents, the removal of As2O3 in flue gas by Fenton oxidation reaction was studied in the self-designed bubbling reactor. The effects of reaction temperature and simulative flue gas compos...