Determination of the Active Power Filter Type Based on the Component to be Compensated
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2018, Vol 6, Issue 3
Abstract
Power converters affected by nonlinear loads cause the current from the grid. Because of this harmonic distortion current and voltage wave forms of grid becomes sum of the fundamental component and other sinusoidal components having different frequency and amplitude. Design of active power filters with the recent advances in microcontroller technologies has gained momentum in order to use the electrical energy in a more efficient way by removing the harmonic effects on the grid caused by nonlinear electrical loads or by compensating the distortive effects of the grid in order to prevent the load to be affected. In this study, available active power filter topologies in literature have been classified and three different types of filters have been simulated by using p-q instantaneous power theory to create a comparison table in which the selection criteria of active power filters based on the component to be compensated have been stated.
Authors and Affiliations
Selin ÖZÇIRA
Keywords
Related Articles
- EP ID EP491141
- DOI 10.29109/gujsc.405470
- Views 83
- Downloads 0
COMPARISON OF FLAT AND INCARCERATING SURFACE SOLAR SUPPORTED DRYING SYSTEMS FOR APRICOT DRYING
In this study, drying systems with flat and incarcerating surface absorbent plates were designed and manufactured for drying apricots, then their performances were compared. Experiments were carried out with slices 4-5 m...
Implant Surface Micro-fabrication and Characterization in Q-Switched Mode with ytterium-doped Fiber Laser
Surface morphologies of titanium implants has crucial importance for long-term stability which following their placement. Different techniques of surface modifications were adopted to increase bone–implant interface. Tod...
Measurement of Emission Reduction Which Depend on Trip Change by Modelling with Park and Ride System in Ankara
Park and Ride Systems (P+R) are transfer systems which are located around the city and near the city center that encourage individuals from using passenger cars to public transport to minimize the use of passenger cars d...
Effects of Boron Phosphate Additive on Ceramics with Anorthite Phase
In this study, the anorthite phase was chosen as a ceramic type that can withstand thermal shock. First, boron phosphate was synthesised, boron phosphate was calcined at 1000°C and characterized by XRD and chemical analy...
Thermodynamics and Performance Analysis of a Diesel Engine with the Help of a Computer
In this study, a simulation was developed in MATLAB program for a single cylinder, normally aspirated, direct injection diesel engine cycle. As a result of simulation engine performance curves have been obtained at full...