Effects of Boron Phosphate Additive on Ceramics with Anorthite Phase
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2018, Vol 6, Issue 2
Abstract
In this study, the anorthite phase was chosen as a ceramic type that can withstand thermal shock. First, boron phosphate was synthesised, boron phosphate was calcined at 1000°C and characterized by XRD and chemical analyzes. On the other hand, in the phase diagram, the most suitable eutectic points covering the anorthite phase (CaO, Al2O3, SiO2) and at the lowest temperature at which anorthite can form are selected. 6 mixtures were prepared using wollastonite, kaolinite and calcite. The 6 mixtures prepared were separated into two equal parts and the second parts were added of BPO4 10%. The mixtures were pressed at the same pressure and cooked under the same conditions and at the same heating rate in the electric oven at 1050, 1100, 1150 and 1200°C. DTA and TGA analyzes were applied to the samples before sintering, and XRD analyzes were applied to the sintered samples. According to the test results, the addition of the synthesized BPO4 has shown that the anorthite phases are formed at temperatures well below the theoretical formation temperatures without swelling.
Authors and Affiliations
Meltem ÇUBUK, Metin GÜRÜ, Bülent BARAN, Ali Sacid AĞIR
Keywords
Related Articles
- EP ID EP490310
- DOI 10.29109/http-gujsc-gazi-edu-tr.370683
- Views 83
- Downloads 0
Reliability Analysis of A Cantilever Beam with Circular Hole Depending on Stress-Concentration Factor By Using Monte Carlo Simulation Method
Stress-concentration factor (SCF) is known to be the ratio of the maximum experimental stress around the sudden change of the geometric shape to the theoretical nominal or reference stress. Recently, the investigation of...
The Impact of Acoustic Parameters on the Classification of Firearms Using Gunshots
Acoustic analysis is mainly used in material science and human voice. In recent years, many areas such as sound perception, gun and shooter detection, unmanned aerial vehicles have been used in the defense industry. Acti...
Determination of Optimum Cutting Parameters Affecting the Surface Form Properties in the Ductile Stainless Steels with Gray Relational Analysis Method
In this study, the effects of cutting parameters with different coatings (TiAlN and TiN) on drilling performance were investigated. Drilling operations were carried out on duplex stainless steels by drilling holes 20 mm...
Synthesis and Characterization Studies of New Generation MIL-101 Materials
MIL-101, a kind of Metal Organic Frameworks (MOFs), has attracted attention in recent years with its promising applications in the chemical industries. MIL-101 is also known as “Porous Chromium Terephthalate”. It has ver...
Factors controlling the formation of hydrothermal sulfur deposits in Keçiborlu mine
Replacement-type subsurface sulphur ores of Keçiborlu are situated in fault controlled and metasomatically altered fragmental ophiolite media between alkaline Pliocene volcanics of Isparta and Afyon regions (SW Turkey)....