Determination of the functional state of the fruits by parameters of the electric impedance
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2014, Vol 0, Issue 56
Abstract
Introduction. To assess the freshness of various products are often used measuring impedance module. But due to the structure of plant foods diagnostic value should have exactly a complex component of impedance. Article tasked with developing criteria for assessing the functional state of the products subject to a comprehensive component of the impedance. Research methodology. To determine the functional status of the fruit were measured module and phase of impedance at the three frequencies of 20, 100 and 500 kHz. Criteria for recognition of functional status deter-mined by the dynamics of changes in the parameters of the complex impedance due to destructive processes caused by dehydration and putrefaction processes. Data processing and analysis. On the basis of experimental data obtained at three frequencies modeled frequency and phase response and their changes during losing of freshness and appear-ance of destructive processes. Discussion and conclusions. In fresh and stale fruit modulus and phase of the impedance at low and high frequencies have characteristic differences. But this is especially evident on the phase–frequency characteristic, which can be seen that the value of the phase with the loss of freshness at low frequency decreases and increases at high more than twice during one week. Therefore, to assess the functional state of fresh and stale products we suggest use phase portraits of phase response.
Authors and Affiliations
E. Guseva, V. Mosiychuk, G. Timoshenko, O. Sharpan
Keywords
Related Articles
- EP ID EP308962
- DOI 10.20535/RADAP.2014.56.102-111
- Views 75
- Downloads 0
Selecting the number of frequencies for real time electroimpedancemetry of biological objects
Introduction. Determining the sufficient number of frequencies for biological object impedance measuring is being researched. The presence of one or two object granularities is considered. Formulation of the problem. Oft...
Dual- And Multiband Horns of feed systems for reflector-type antennas
This paper propose a review of feed systems for reflector-type antennas. Main attention is paid to coaxial, multimode, corrugated and dielectric loaded feed horns.
Method of planning sessions on communication nodes
Communication nodes are main elements of radio communication system, which are making tasks to receive, handle and transmit information. The system of management was established to provide making tasks that belong to com...
Ferrite resonator in Y-junction stripline
Introduction. One of the ways to miniaturize nonreciprocal microwave ferrite devices is using a ferrite resonator in ferromagnetic resonance. It is necessary to investigate the inter-action of the ferrite resonator with...
Model of the Multi-Resonator Monolithic Metal-Dielectric Filter
Mathematic model and equivalent circuit of the multi-resonator monolithic metal-dielectric filter are described. This model describes the amplitude frequency characteristic both in band-pass and stop-pass.