Determining the influence of parameters for gas-air flows on the thermal process of producing iron ore pellets
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 2, Issue 2
Abstract
<p>We present the results of the study on changes in temperature of gas-air flows at the outlets from calcination zones and recuperation zones of a conveyor-calcination plant. We determined the influence of these temperatures on other technological zones.</p><p>We showed that that the average volume temperatures of gas-air flows from calcination and recuperation zones are the exponential dependences on temperatures of gas-air flows above a layer of pellets in these zones. It was established that an increase in the speed of movement of calcination carts from 0.011 m/s to 0.06 m/s leads to a decrease in the average volume temperature of a heated gas-air flow by 1.7 times. An increase in the height of a pellet layer on calcination carts by 30 percent with constant gas permeability of this layer leads to an exponential decrease in the average volume temperature of a gas-air flow by 2.5 times at the outlet from the calcination and recuperation zones. The average volume temperatures of gas-air flows decrease at the outlet of a pellets layer up to three times at a change in the pressure by 20 % in the calcination zone and at the constant movement speed of calcination carts of 0.049 m/s, the height of a pellets layer of 450 mm and the porosity of a pellets layer of 0.45 m³/m.</p><p>We used a mathematical model to analyze a temperature mode of a gas-air flow at the outlet of the pellet calcination zone. The basis of the mathematical model was the relation between the inlets and outlets of technological zones of the plant by equations of gas dynamics and heat exchange and mass transfer.</p><p>The study made it possible to develop and present an automated control system for a smoke exhauster for average volume temperatures of gas-air flows at the outlet from the technological zones of calcination and recuperation of the plant. It is possible to use it under industrial conditions.</p>It improves thermal and gas-dynamic operation of technological zones of a conveyor calcination plant
Authors and Affiliations
Vyacheslav Lobov, Karina Lobova, Oleksandr Mytrofanov
Keywords
Related Articles
- EP ID EP666280
- DOI 10.15587/1729-4061.2019.163278
- Views 49
- Downloads 0
Development of the information system for forecasting collision between birds and wind farms
<p>The information system for processing the results of observations of birds on the territory of a wind farm was created. The information system ensures the storage and processing of the monitoring results, conducting s...
Detecting the influence of heat sources on material properties when producing aviation parts by a direct energy deposition method
<p>Quality of the material obtained by the method of direct energy deposition using three heat sources (plasma arc, electric welding arc and welding arc with cold metal transfer) was studied. AlMg5 alloy wire was used as...
Development of models and research into tooling for machining centers
<p>We have constructed three-dimensional solid models for tool storage of the disk type (for 14 instruments) and the chain type for 32 tools, mounted onto the side surface of a machine column. We propose a 3D model of th...
Research into the impact of structural features of combustion chamber in energy-technological units on their operational efficiency
<p>The experimental studies of the influence of the degree of masonry development (geometry) and aerodynamics of the combustion chambers (circuits of combustion products removal) on the energy-technological indicators of...
Determining biological value and quality indicators of beverages of the drinkbreakfast type
<p class="a">We have developed formulations and production technology for beverages of the “drinkbreakfast” type with the elevated content of protein and pronounced antioxidant properties. Components of the composition...