Development of 6lowpan Mote for IOT
Journal Title: IOSR Journal of Electronics and Communication Engineering(IOSR-JECE) - Year 2018, Vol 13, Issue 3
Abstract
Internet of Things (IoT) has emerged these last years as one of the most attractive subjects in both the research community and the public. Wireless Embedded Internet aims for efficient connectivity for embedded devices to the internet. This requires the embedded devices to run IPv6 protocol. 6LoWPAN is IPv6 over Low-Power Wireless Personal Area Networks. Raspberry Pi B+ module is used as processor and TICC2520 is used as RF module. Customize the Linux kernel and boot loader for Raspberry Pi. And develop device driver for RF module. Evaluate the system and make a comparison between various other wireless protocols.
Authors and Affiliations
Krishnendu P, Tintu Mary John
Keywords
Related Articles
- EP ID EP439110
- DOI 10.9790/2834-1303014854.
- Views 138
- Downloads 0
Design and Verification of Five Port Router Network
A Network-on-chip (NoC) is a new technique in complex system-on-chip (SoC) designs which helps to facilitate efficient on chip communication among networks. It permits decoupling of communication, computation and also pe...
Performance of Cooperative Spectrum Sensing System with Multipath Fading Reporting Channel
The detection of the primary user (PU) signal, or what is called the spectrum sensing, represents a serious challenge for releasing reliable cognitive communication systems. Cooperative spectrum sensing can be employed i...
Steering of Circular patch antenna in RFID Application towards Positioning, Navigation, and Location Based Services (PNLBS)
This paper presents optimization and explanations of the main features of the latest RFID technology which have rarely or unclearly been presented for example, the longest reading range of RFID systems, the smallest tag...
Thermoelectric Properties of Semiconducting materials
Thermoelectric is a science and technology associated with electric converters, that is the generation of electrical power using the Seeback effect and refrigeration using the Peltier effect.Thermoelectric generators are...
Detached Sb-Based Crystal Growth by VDS: Fabrication and Characterization of the Schottky and MOS Devices on InSb VDS-Substrate Operate At 300k
In this research, Schottky Barrier diode (SBD) and MOS structure fabrication process on substrates (n-InSb, p-InSb) from the detached crystals grown by the vertical directional solidification (VDS) have been reported. An...