Development of a device for the optimal reception of signals against the background of an additive three-component interference
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 2, Issue 9
Abstract
We have synthesized the optimal receiver of code signals from an automated locomotive signaling system. The signals are observed against the background of a three-component additive interference. The first component of the interference is pulse, the second component is a continuous sinusoidal disturbance from a power line, the third component is the Gaussian noise. We have implemented a method of joint evaluation of signal parameters and the structurally deterministic interference in the receiver. The proposed method is flexible to the changing parameters of interference. A decision on the form of the received code signal is made based on the criterion of a minimum in the mean square of approximation error. The error of approximation means a difference between the magnitude of the sum of a signal and the structurally deterministic interference components and the magnitude of total voltage at a receiver’s input. It has been shown, based on realistic assumptions about the statistical relationships between a signal and the interference components, that the objective function is a sum of the isolated logarithms from the ratios of likelihood and correction functions, taken with an opposite sign. This research has focused primarily on studying a possibility to reduce the impact of structurally deterministic interference. The result is the designed device capable to respond quickly to changes in the parameters of such an interference. We have shown a fundamental possibility to construct an optimal receiver in a modular fashion. In this case, modules can be connected and disconnected according to the a priori defined composition of the interference set, while the «library» of modules can be updated when the new kinds of interference emerge. It has been shown through computer simulation that in the channel, responsible for forming a valid solution, the magnitude of approximation error is about 6 times less than in the other two channels. This ratio holds when the amplitudes of a pulse noise and an interference from a power line have a multiple advantage over the amplitude of the code signal. The designed device ensures high noise immunity when distinguishing code signals over a wide range of interference parameters. This would make it possible to improve the safety of motion, as well as accuracy in keeping the schedule of trains
Authors and Affiliations
Olha Ananieva, Mykhailo Babaiev, Vasyl Blyndiuk
Keywords
Related Articles
- EP ID EP666320
- DOI 10.15587/1729-4061.2019.159310
- Views 59
- Downloads 0
Analysis of dynamics and prediction of reliability indicators of a cooling thermoelement with the predefined geometry of branches
<p>We have investigated the influence of structural and technological elements on the basic parameters, reliability indicators, and the dynamics of operation of thermoelectric cooling devices under various current modes...
The analysis of friction effect on equal channel angular pressing (ECAP) process on Aluminium 5052 to homogeneity of strain distribution
<p class="SDRMText">In the current study, the effect of friction coefficient on strain distribution and deformation was investigated with the computer simulation providing a better understanding of the material flow mech...
Results of experimental researches into process of oak veneer drying in the solar dryer
<p>A new design of solar drying plant with the active solar energy system is developed. It is proposed to use the K1-102 automated control system to diagnose the key parameters of air exchange in the solar dryer and to p...
Development of a method for the creation of 3d advertising printing products
<p>The analysis of characteristic features of 3D advertising design is carried out. It was found that since the input information concerning the task of structuring the stages of creation of 3D advertising printing produ...
Study of quality indicators for meat raw materials and the effectiveness of a protective technological method under conditions of different content of heavy metals in a pig diet
The paper report results of research related to studying a change in the qualitative indicators and technological properties of meat and lard of swine under conditions of different diet compositions, specifically, with t...