Development of Aplication for Analysis of Machinability Index
Journal Title: Tribology in Industry - Year 2009, Vol 31, Issue 1
Abstract
Rapid development of new materials, cutting tools and cutting fluids promote research of machinability for new materials and tribological characteristic of cutting tools and cutting fluids. Material machinability is very complex category and it must be considered from different points of view and with different machining requirements. It depends upon a number of influencing factors, primarily associated with mechanical, structural and thermal characteristic of working material and it is expressed through output parameters from machining process (tool wearing, cutting forces, quality of machining surface, etc.). This paper presents developed application, which gives results for machinability index for group of tough machined materials. Application is fundamentally developed on experiments, when measuring cutting force at turning operation for group of tough machining materials, and also experiments done on tribometer „Block on Disk“. Application consists of several databases, developed modules for cutting forces calculation, experimental relations for evaluation of friction coefficient at clearance surface of cutting tool. Output indicators of application are comparative graphical and analytical results of machinability index for analyzed group of tough machining materials.
Authors and Affiliations
G. GLOBOČKI LAKIĆ, S. BOROJEVIĆ, Đ. ČIČA, B. SREDANOVIĆ
Keywords
Related Articles
- EP ID EP86751
- DOI -
- Views 161
- Downloads 0
Wear Performance Optimization of Electroless Ni-B Coating Using Taguchi Design of Experiments
The present study outlines the use of Taguchi parameter design to minimize the wear performance of electroless Ni-B coating by optimizing the tribological testing parameters. The tests are carried out in a multi- tribote...
Possibility of Replacing the Chorinated Paraffins in Metalworking Fluids
All components that are used for neat oil formulations for metalworking operations belong to group of chemicals that, because of its direct application, can have a big influence on the environment and especially on human...
Tribological Properties of Biodegradable Universal Tractor Transmission Oil
The annual consumption of lubricants in the world is around 40 million tons out of which less than 40 % are collected and properly processed meaning regeneration, re-refining and controlled incineration while the rest is...
Epoxy Resin Based Composites, Mechanical and Tribological Properties: A Review
High fuel consumption by automobile and aerospace vehicles built from legacy alloys has been a great challenge to global design and material engineers. This has called for researches into material development for the pro...
Influence of Parameters on Sliding Wear of Titanium Nitride Coated 6061 Aluminium Alloy
The objective was to study the wear behaviour of titanium nitride deposited onto 6061 aluminium alloy by DC magnetron sputtering technique. The coating on the aluminium substrate was characterized using optical microscop...