Development of new metal matrix composite electrodes for electrical discharge machining through powder metallurgy process
Journal Title: Carbon - Science and Technology - Year 2014, Vol 6, Issue 4
Abstract
Electrical discharge machining (EDM) is one of the widely used nontraditional machining methods to produce die cavities by the erosive effect of electrical discharges. This method is popular due to the fact that a relatively soft electrically conductive tool electrode can machine hard work piece. Copper electrode is normally used for machining process. Electrode wear rate is the major drawback for EDM researchers. This research focus on fabrication of metal matrix composite (MMC) electrode by mixing copper powder with titanium carbide (TiC) and Tungsten carbide (WC) powder through powder metallurgy process, Copper powder is the major amount of mixing proportion with TiC and WC. However, this paper focus on the early stage of the project where powder metallurgy route was used to determine suitable mixing time, compaction pressure and sintering and compacting process in producing EDM electrode. The newly prepared composite electrodes in different composition are tested in EDM for OHNS steel.
Authors and Affiliations
C. Mathalai Sundaram, R. Sivasubramanian, M. Sivakumar
Keywords
Related Articles
- EP ID EP49926
- DOI -
- Views 226
- Downloads 0
Investigation of composite coated Ti-C-N surfaces with ball-cratering test method
We present the performance of dry sliding metal-metal wear performance of AISI SS410 and Ti-C-N coated specimens at room temperature. In this investigation, the ball cratering abrasive wear testing method was used with a...
Process parameters optimization for synthesis of methyl ester from sunflower oil using Taguchi technique
In this work, transesterification of sunflower oil for obtaining biodiesel was studied. Taguchi’s methodology (L9 orthogonal array) was selected to optimize the most significant variables (methanol, catalyst concentratio...
Enhancing anaerobic digestion of poultry litter in field digestors by incorporating in-line pre-digestor assembly
Anaerobic fermentation inside the digestor is the continuous process which results in the formation of useful biogas fuel. All feedstocks are not easily decomposable thereby necessitating the design of an “optional in-li...
Antibacterial activity of Nano-Silver capped by β-Cyclodextrin
Silver nanoparticles were prepared by chemical reduction method using sodium citrate as reducing agent, followed by capping with various concentrations of β-Cyclodextrin (β-CD) and characterized by various physicochemica...
Dry fermentation technology for utilization of Bio-energy crops/crop residues for biogas production
Indian state Punjab produces 160 lakh tones of paddy every year. More than this quantity of paddy, straw is also produced which is not properly utilized. Paddy is burnt in the farmer’s fields itself, which produces lot o...