DIFFERENT TYPES OF FILLERS IN FINE-GRAINED CONCRETE MADE FROM INDUSTRIAL WASTE WITH BINDING MATERIAL
Journal Title: Journal of Mechanical Engineering Research & Developments (JMERD) - Year 2018, Vol 41, Issue 2
Abstract
The work is dedicated to the development of nano-structured paints with a barrier effect. The process of the preparation of such compositions has been studied. The influence of various technological parameters on the processing of these compositions is shown. A practical and effective method for monitoring the progress of this process is proposed. The contribution of technological parameters that allow scaling of the obtained results to experimental and industrial technological lines equipped with serial equipment for the production of paint and varnish composite materials for various purposes is estimated, namely, the dependence of the processing efficiency of carbon nanotubes in the solution medium of an epoxy oligomer on the angular velocity is established. In addition, the temperature limits for the processing of these nanotubes are established for the preparation of nano-structured paint and varnish compositions, which have a barrier effect. It has been established that for the intensification of the processing process, it is necessary to use dispersing bodies and assess the effect of their geometric parameters together with the degree of filling on the efficiency of this processing process. On the basis of this research, the mathematical expression connecting volume capacity with various technological parameters for an estimation of efficiency of process of manufacture of the nano-structured paint and varnish compositions possessing barrier effect is offered.
Authors and Affiliations
A. A. Ismailov,, R. A. Ristavletov, R. B. Kudabayev, S. A. Saparov, G. Ch. Sypabekova
Keywords
Related Articles
- EP ID EP404724
- DOI 10.26480/jmerd.01.2018.14-17
- Views 98
- Downloads 0
PHYSICAL RESOURCES PRIORITIZATION
In the context of highly competitive environment, enterprises are looking for a way to increase productivity while reducing financial expenses. This situation leads to the fact that manufacturers affect the level of prod...
DEVELOPMENT ORIENTATION FOR HIGHER EDUCATION TRAINING PROGRAMME OF MECHANICAL ENGINEERING IN INDUSTRIAL REVOLUTION 4.0: A PERSPECTIVE IN VIETNAM
.
APPLYING PHOTOELASTICITY WITH OPTICAL MAGNIFICATION METHOD TO INCREASE PRECISION OF DETERMINING FRINGE ORDER UNDER MONOCHROMATIC LIGHT
Photoelasticity method was used to measure strain and stress fields to address the precision problem of determining fringe order of loading and cracking and notch areas. In this study, microscope was used as an additiona...
ANALYZING THE EFFECT OF HEATED WALL SURFACE TEMPERATURES COMBUSTION CHAMBER DEPOSIT FORMATION
One of the most important studies on using diesel fuel is the basic study of combustion chamber deposits in engines. These studies were conducted to investigate the effects of deposits on the engine and how deposits are...
NUMERICAL INVESTIGATION OF MODIFIED SAVONIUS WIND TURBINE WITH VARIOUS STRAIGHT BLADE ANGLE
The present paper aims to numerically investigate the two-dimensional flow analysis of modified Savonius wind turbine using computational fluid dynamics. The effects of the straight blade angle on the turbine performance...