Disperse reinforced cast concrete based on mechanically activated cement-ash binder
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2017, Vol 1, Issue 68
Abstract
The article deals with the influence of the dosage of fly ash in portland cement in the presence of superplasticizer C-3 and basalt fiber on the strength of cast concrete. It is determined that concrete strength is reduced by an average of 2.5-4.5% for every 10% of the dosage of fly ash. The mechanic activation of cement-ash binder increases the strength of cast concrete compared with the control specimen on average of 30-35%, which allows to increase the dosage of fly ash in concrete by 15-20%. It was found that the presence of 80% of the ash in the binder when it is being mechanically activated in the presence of superplasticizer C-3 allows to obtain cast concretes with strength of 15-22MPa. Insignificant influence of the dosage of basalt fiber on the strength increase (up to 10%) of the cast concrete was stated.
Authors and Affiliations
S. N. , Mostovii, I. V. , Barabash, L. N. , Ksenshkevich, T. I. , Barabash
Keywords
Related Articles
- EP ID EP325943
- DOI -
- Views 158
- Downloads 0
bearing capacity of compressed steel reinforced concrete structural elements using shaped pipes with cavities for engineering communications
In some cases, during the design and construction of buildings and structures, there is a need to hide engineering networks within the bearing structures. For this purpose it is advisable to use cavities for engineering...
Modeling of intellectual support system for decision-making on technical regulation in building
One of the ways to solve the problems of increasing the speed and reliability of the functioning of expert systems is the development of software tools the work of which is based on the concept the knowledge base usage....
Forecasting frost-resistance of the cement stabilized soils by the index of their porosity
Estimating the durability of the cement stabilized soils’ layers of road clothing must have a set of different indicators. One of the most important indicators of the durability of layers of road clothing from the cement...
Modeling of foamed concrete process structure formation and evaluation methods of its nature structure
The analysis of simulation types and their application in solving scientific and engineering problems, as well as in defining and optimizing the structure of foam mortar has been conducted. Analysis of the obtained resul...
Retrospective analysis of building codes requirements for frame buildings earthquake engineering
The paper discusses the main features of building codes on the construction and maintenance of buildings in seismic areas. Main attention is paid to changes in building codes requirements for frame buildings, as well as...