Dual Band Slotted Printed Circular Patch Antenna With Superstrate and EBG Structure for 5G Applications
Journal Title: Mehran University Research Journal of Engineering and Technology - Year 2019, Vol 38, Issue 1
Abstract
Slotted circular printed layered patch antenna is designed, simulated and fabricated for 5G (Fifth Generation) wireless communication applications. The antenna consists of slots in the main radiating circular patch element for miniaturizing the size of the radiating element and providing dual band radiation characteristics. The feed line is separated on bottom substrate layer with EBG (Electromagnetic Band-Gap) embedded for enhancing the gain characteristics of the antenna. Superstrate layer is also used for improving the gain of the antenna where the distance from the radiating antenna element is optimized for maximizing the impedance bandwidth and radiation characteristics. The feed realization and impedance matching of the radiating slotted circular patch antenna is done by inducing slot at the middle ground plane of the slot embedded circular patch antenna system. The proposed configuration provides power radiation gain values of more than 5 dB for the Ka band of communications, whereas the impedance bandwidth of the antenna is verified for the dual resonances at 27.5 and 28.5 GHz. Dual band radiation characteristics are attained by embedding and optimizing the slot length and width in the circular patch radiator element that is placed on the upper face of the substrate RT Rogers Duroid 5880 layer. The length of the microstrip feed line embedded in the lower layer of the substrate is optimized for providing required bandwidth characteristics for the dual frequency point radiations. The antenna configuration is designed, modeled and simulated in CST (Central Standard Time) Microwave studio. The antenna is fabricated and measured vs simulated frequency response, gain patterns and current density plots are presented for the verification of antenna operation in the desired frequency bands.
Authors and Affiliations
B. Hasan, K. Raza
Keywords
Related Articles
- EP ID EP445200
- DOI 10.22581/muet1982.1901.19
- Views 126
- Downloads 0
Numerical Simulation of Mixing of Effluent through Porous Media: The Effects of Local Inertia on the Flow
The steady–state analytical and numerical solutions are obtained for the mixing of effluent with Newtonian fluid in subsurface. The problem presented in this research work is flow through a channel packed by homogeneous...
Air Consumption Analysis of Air-Jet Weaving
In Textile industry, production is mostly key concern for Industry owner. This always has attracted researchers and machines manufacturers to make new developments in process and machines. Air-jet is one of the leading a...
Effect of Lowering Twist Levels on Quality Parameters of Rotor Spun Cotton Yarn
Investigations were made to explore the influence of lowering twist level on quality characteristics of rotor spun yarn. Three levels of yarn linear density (i.e. 40, 35 and 30 tex) and five levels of twist (i.e. 700, 60...
Mobile Application Testing in Pakistan: A Survey
Research regarding MAT (Mobile Application Testing) in Pakistan is hard to discover and to the best of our knowledge, no work has been done in surveying MAT in Pakistan. In this work, we have examined the current trend a...
An Android Based Cooperative Knowledge Acquiring Application
The world is tilting more and more towards technology and the use of mobile devices is getting usual day by day. The majority of the user who use these gadgets are younger in age and belong to student class mostly as the...