Dust creation during birch plywood production
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2017, Vol 98, Issue
Abstract
Dust creation during birch plywood production. The article describes the results of particle size distribution of dust created during plywood production. The plywood production was based on birch wood from Belarusian resources. The particle-size distribution of dust sampled on plywood producing line was determined by two methods. The sieve analysis was used for determination of general particle-size distribution. Then the fraction of the smallest dust particles was analyzed by the laser diffraction method. This procedure allowed the evaluation of the content of very fine particles which, when dispersed in the air, could be the inhalable and respirable fraction.
Authors and Affiliations
Tomasz Rogoziński, SERGEI TROFIMOV
Keywords
Related Articles
- EP ID EP339255
- DOI -
- Views 72
- Downloads 0
Zur Orthotropie der physikalisch – mechanischen Eigenschaften von Fichtenholz
Zur Orthotropie der physikalisch- mechanischen Eigenschaften von Fichtenholz. Fichte und Kiefer sind die im Bauwesen am häufigsten eingesetzten Holzarten. Insbesondere Brettschichtholz, Brettsperrholz oder Brettstapelele...
The effect of selected factors on elastic deformation
The effect of selected factors on elastic deformation. This article is aimed at determining the effect of the wood species (Beech - Fagus Silvatica, Aspen -Populus Tremula L), the thickness of samples used (4, 6, 10, 18...
Impact of the veneer quality on the properties of the LVL
Impact of the veneer quality on the properties of the LVL. In the study, 13-layer LVL boards were made from pine veneers divided into 4 quality classes. The individual plates were varied in terms of veneers content of th...
Physical-mechanical properties of surface finish on aspen poplar wood
Physical-mechanical properties of surface finish on aspen poplar wood. The article deals with the hardness of transparent coatings and the impact resistance of the coatings on aspen poplar wood. Transparent finishes, the...
In situ density detection method of spruce structural timber
In Situ Density Detection Method of Spruce Structural Timber. Density of wood is a significant parameter determining the quality. We can use PILODYN 6J device to detect the density of wood in situ. Depth of steel pin pen...