Effect of Band Contact on the Temperature Distribution for Dry Friction Clutch
Journal Title: Tribology in Industry - Year 2013, Vol 35, Issue 4
Abstract
In this study, the two dimensional heat conduction problem for the dry friction clutch disc is modeled mathematically analysis and is solved numerically using finite element method, to determine the temperature field when band contacts occurs between the rubbing surfaces during the operation of an automotive clutch. Temperature calculation have been made for contact area of different band width and the results obtained compared with these attained when complete contact occurs. Furthermore, the effects of slipping time and sliding velocity function are investigated as well. Both single and repeated engagements made at regular interval are considered.
Authors and Affiliations
O. I. Abdullah, J. Schlattmann
Keywords
Related Articles
- EP ID EP141675
- DOI -
- Views 84
- Downloads 0
The Effect of Friction Behaviour and Wear Protection Ability of Selected Base Lubricants on Tribo-pairs Parameters of Machine Components
The experimental tests of selected tribo-pair in three loading cycles were compared in this paper. Tests were performed with mineral transmission oil and ecological synthetic ester base oil, which were dropping by Gravit...
Finite Element Modeling of RMS Roughness Effect on the Contact Stiffness of Rough Surfaces
The present study considers finite element analysis of an elastic and elastic-plastic contact between a rigid flat and a real rough surface taking into account the asperities interaction. Numerical modeling and measureme...
Effect of Refractory Elements on Wear Intensity of the Surface Layers in the Abrasive Soil Mass
The paper presents the results of researches on tthe influence of vanadium and niobium on wear intensity of the surface layers in soil mass. The investigations were conducted in the laboratory conditions on a wearing mac...
Correlation between Surface Roughness Characteristics in CO2 Laser Cutting of Mild Steel
CO2 laser oxygen cutting of mild steel is widely used industrial application. Cut surface quality is a very important characteristic of laser cutting that ensures an advantage over other contour cutting processes. In th...
Development of Mobile Device for Oil Analysis
This paper presents the results of project focused on development and practical application of mobile instrument for on-site analysis of industrial oils. For years, the implementation of the oil analysis was limited to a...