Effect of Graphene Nanoplatelets (GNPs) on Tribological and Mechanical Behaviors of Polyamide 6 (PA6)
Journal Title: Tribology in Industry - Year 2017, Vol 39, Issue 3
Abstract
The effects of Graphene Nanoplatelet (GNP) on mechanical and tribological properties of Polyamide 6 (PA6) were studied. The composites were blended using twin-screw extruder and subsequently injection molded for test samples. Mechanical properties were investigated in terms of microhardness, scratch hardness and Young’s modulus measurements and tensile test. The tribological behavior of composites was studied by using ball-on-disc reciprocating tribometer. Recent studies showed that the addition of GNP in PA6 matrix resulted in enhancement of mechanical and tribological properties.
Authors and Affiliations
F . Mindivan
Keywords
Related Articles
- EP ID EP229709
- DOI 10.24874/ti.2017.39.03.01
- Views 77
- Downloads 0
Reparatory and Manufacturing Hard-Facing of Working Parts Made of Stainless Steels in Confectionary Industry
In this paper, for the sake of improving the reparatory hard-facing technology is especially analyzed reparatory hard-facing of tools for manufacturing compressed products in confectionary industry. Those products are be...
The Initial Estimate of the Useful Lifetime of the Oil in Diesel Engines Using Oil Analysis
In this paper the Initial lifetime of the lubricating oil in 70 Diesel engines model E6-350 ECONODYNE 4VH has been estimated using oil analysis. The engines have been installed on the super heavy vehicles. This method is...
On the Performance of Pivoted Curved Slider Bearings: Rabinowitsch Fluid Model
The present theoretical analysis is to investigate the effect of nonNewtonian Pseudoplastic & Dilatant lubricants (lubricant blended with viscosity index improver)–Rabinowitsch fluid model on the dynamic stiffness a...
Research Regarding Drilling Masts Reliability under the Combined Action of the Wind and the Hook Load
Portable masts are parts of mobile servicing rigs designed to work at drilling or extraction wells and are made of three sections: fixed section, lower section and upper section. During transportation, the mast is placed...
Three Body Abrasive Wear Behavior of Glass-Basalt PA66/PTFE Hybrid Composites in Multi pass Condition
The three body abrasive wear (3-BAW) of Glass – Basalt hybrid composites is studied. The PA66/PTFE blend(80/20 wt.%), Blend/Short glass fiber(SGF), Blend/Short Basalt fiber(SBF),Blend/10 wt.% SGF/10 wt.% SBF (GB) were th...