Effect of laser modification of WC-Co tool-life during particleboards milling
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2017, Vol 98, Issue
Abstract
Effect of laser modification of WC-Co tool-life during particleboards milling. The paper describes an influence of CO2 laser beam on performance of WC-Co cutting edge dedicated to wood-based material machining. Comparable average tool wear indicators such as average cutting distance or average relative indicators for the reference and the modified tools were obtained. High diversity of results suggests further search for better parameters of the modification process.
Authors and Affiliations
Jacek Wilkowski, Paweł Kołodziejczak, Marek Barlak, Zbigniew Werner, Bogdan STASZKIEWICZ
Keywords
Related Articles
- EP ID EP339263
- DOI -
- Views 102
- Downloads 0
Utilization of cellulose biomass by anaerobic digestion. Optimization of microbial fuel cell (MFC) parameters.
Utilization of cellulose biomass by anaerobic digestion. Optimization of microbial fuel cell (MFC) paramaters.). Following work describes research concerning surface of electrodes as a limiting factor of power output in...
Problems related to renovation of timber roof trusses of an industrial hall dating back to the first half of the 20th century
Problems related to renovation of timber roof trusses of an industrial hall dating back to the first half of the 20th century. The paperdescribes the technical condition of timber trusses of anatypical roof covering of a...
Dynamic burnishing of wood
„Dynamic burnishing of wood” The subject of the article is dynamic burnishing of Wood, which is used in a different way than previously because it is used to surface structuring. Described technology is a method using bu...
A study of natural durability of wood in selected tropical wood species from South America and Africa affected by the fungus Serpula lacrymans (Wulf, Fr.) Schroet.
This paper presents the results of a study on natural durability of selected tropical wood species from South America and Africa affected by Serpula lacrymans (Wulf., Fr.) Schroet. Tabebuia sp. and Autranella congolensis...
In situ density detection method of spruce structural timber
In Situ Density Detection Method of Spruce Structural Timber. Density of wood is a significant parameter determining the quality. We can use PILODYN 6J device to detect the density of wood in situ. Depth of steel pin pen...