Effect of Sintering Temperature on Mechanical Properties of Mg-Zr Alloy
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2017, Vol 7, Issue 5
Abstract
Magnesium, Zirconium alloy is developed in three different sintering temperatures through powder metallurgy technique followed by hot extrusion in this work. The application of this material is for orthopedic implants. Magnesium alloy result shows improvement in density, hardness, tensile strength and minimized porosity on increasing sintering temperature. The surface characterization of the alloy is carried out through optical microscopy. The SEM (Scanning Electron Microscope) analysis of fractured surface of Mg alloy shows quasi-cleavage fracture.
Authors and Affiliations
T. Judson Durai, M. Sivapragash, M. Edwin Sahayaraj
Keywords
Related Articles
- EP ID EP245033
- DOI -
- Views 81
- Downloads 0
DESIGN AND PERFORMANCE EVALUATION OF POLYHEDRAL SWEPT BACK HIGH WING CHUCK GLIDER FOR BETTER L/D RATIO
“It’s not flying its falling in style.” The chuck gliders are the ones which do not require any kind of thrust force since these do not have any mechanical or electrical power supply to it. For flying of such gliders, th...
Design and Development of Cartesian Co-Ordinate Based 3D Printer
Now a day, manufacturing of complex parts have become a major role in industries. By the use of subtractive processes, there is a lot of scrap and also the accuracy of parts is not up to the mark. So, to eliminate these...
Wear Behavior of AL 7075/FA/SiC Hybrid Composites
This research examined the influence of sic and fly ash on the wear behavior of Aluminum 7075/5 and weight percentage of hybrid complex. Aluminum alloy 7075 strengthened with sic-fly ash were examined. The effectiveness...
Effect of Cooled EGR Technique on Performance and Emissions of CRDI Engine Operated with Biodiesel Blends
Hazardous pollutants and limited sources of fossil fuels made power dependent sectors to focus on alternative sources. However, complete replacement is still constrained and challenging. Attempts to assure complete repla...
Computational Analysis of Flow Over Bluff Bodies using Aero Spikes
This paper presents the computational analysis of the effect of aero spikes on bluff bodies. In the present study, a blunt nosed model was designed with and without spike. Two different shaped spikes were chosen for our...