Effect of Yttrium Oxide Impurities on the Structure and Properties of Metallic Hafnium
Journal Title: Фізика і хімія твердого тіла - Year 2016, Vol 17, Issue 2
Abstract
The influence of yttrium oxide impurity content of 0 to 0.4 wt.% on the structure and microhardness metal hafniuminvestigated. It is shown that grain size decreases and the Microhardness of hafnium increases monotonically with increasing content of impurities, while increasing Y<sub>2</sub>O<sub>3</sub> content more than 0.3 wt.% is cracking material.
Authors and Affiliations
S. V. Chornobuk, M. I. Cherednik, V. A. Makara
Keywords
Related Articles
- EP ID EP255150
- DOI 10.15330/pcss.17.2.207-211
- Views 51
- Downloads 0
Model of Mass Crystallization in Layers of Small Thickness
The model of mass crystallization, which allows to take into account the blocking effect of the growing crystals by surfaces of thin layers of melt or rapidly quenched amorphous ribbons is proposed. The kinetic equations...
Hole Conductivity of Thin Layers of Cadmium Telluride with Li and Ca Impurities
Low-temperature annealing of n-CdTe substrates in aqueous suspensions of LiNO3 and Ca(NO3)2 salts created p-conductivity layers. The estimated concentration of free holes in diffusion layers at 300K is (5-50)∙1015 см-3.
The Hollow Spherical Silica Molecule (SiO2)20(H2O)10: Theoretical Calculations of the IR spectrum
The IR spectrum of hollow spherical molecule (SiO2)20(H2O)10 have been calculated within harmonic approximation using density functional theory method (exchange-correlation functional B3LYP and basis set 6-31G (d, p)) an...
Pushing of Interstitial Elements in the Transition Zone under the Growing Diffusion Layers
The kinetics of diffusion of interstitial elements on the example of diffusion saturation with boron and silicon iron- carbon matrix ( - iron) was considered . The layers of intermetallic Fe - B - Si are formed and grow...
Effect of Filler Nature on Chemical Resistance and Microhardness of Epoxy Composite Films
We investigated the processes of water absorption, chemical stability and microhardness of films of epoxy composites that contained as the polymer matrix the epoxy resin UP-655 and mineral fillers: graphite, mica, alumin...