EFFECTIVE TECHNOLOGIES OF DISSOLUTION OF ORGANIC DEPOSITS IN THE BOTTOMHOLE ZONE OF OIL WELLS REGISTRATION FORM
Journal Title: Journal of Mechanical Engineering Research & Developments (JMERD) - Year 2019, Vol 42, Issue 3
Abstract
Article deals with problems of oil production on Kazakhstan`s fields. The necessity of search for more effective ways of restoring the initial permeability of bottomhole zone of the formation was established. The assessment is given to methods of removal and decrease in asphaltic-resinous and paraffin deposits in a bottomhole zone of oil layer. A new technology of treating the bottomhole zone of a layer with oil-based solvents is offered and ways of increasing well flowrates are considered. Experimental studies have been carried out to determine the ability of the recommended new oil reagents to dissolve asphaltic-resinous, paraffin deposits. The conclusion was made that new petroleum solvents differ from others not only in high efficiency but also in low cost and affordability, as they can be obtained with simple equipment directly from the degassed oil in field conditions.
Authors and Affiliations
Dairabay Zh. Abdeli, Bae Wisap, Bakytzhan R. Taubayev
Keywords
Related Articles
- EP ID EP572143
- DOI 10.26480/jmerd.03.2019.15.18
- Views 96
- Downloads 0
CONTROLLABLE VIBRATING SYSTEM TO ENHANCE THE PERFORMANCE OF HEAT PIPE EVACUATED TUBE SOLAR COLLECTOR
Mechanical vibration is used to excite a heat pipe evacuated tube solar collector (HP-ETSC), where two (HP-ETSC's) are built identically to compare the performance of the solar collector with and without applying vibrati...
THE IMPACT OF ALGORITHMS OF FORMING SWITCHING FUNCTIONS OF THE CONTROL SYSTEM IN MATRIX FREQUENCY CONVERTER ON OUTPUT VOLTAGE THD
The AC electric drive based on induction motors is the key basis for many technical rotation and translation systems. However, it requires a significant amount of electric power. In this regard, its energy efficiency is...
ENERGY, ECONOMIC AND ENVIRONMENTAL IMPACT OF WASTE-TO-ENERGY IN MALAYSIA
National human population, economy development and advancement of technologies have led to a high demand of energy. Despite this, depletion of conventional fuels and global warming crisis are hindering the government to...
MICROSTRUCTURE CHANGE FOR MULTI-PASS WELDING BETWEEN AUSTENITIC STAINLESS STEEL AND CARBON STEEL
The purpose of this study was to discuss the change in microstructures and hardness values in fusion zone (FZ) and heat-affected zone (HAZ) of austenitic stainless steel and carbon steel welds. By comparison, the morphol...
NUMERICAL ANALYSIS FOR (H-Q) CURVE OF CENTRIFUGAL PUMPS USING NATURAL AND CONSTRAINED CUBIC SPLINE INTERPOLATIONS
This study is founded by numerical analysis to (H-Q) curve for centrifugal device pump with radial and axial flow fitted firstly with natural spline interpolation and secondly using reserved cubic interpolation spline. T...