Effectiveness of removing heavy metals by bacteria from water solutions
Journal Title: Civil and Environmental Engineering Reports - Year 2010, Vol 1, Issue 5
Abstract
The research on the effectiveness of removing heavy metals from water solutions by bacteria was carried out at the laboratory of the Institute of Environmental Engineering of the University of Zielona Góra in 2007-2008. The research covered bacterial strains isolated from sludge, soil and water. The tests concerned the effect of 3 heavy metals: Pb (0,1%), Cu (0,1%) and Zn (0,1%). The results prove that due to the presence of heavy metals, the size of colonies was much lowered in comparison with the control pan. Some of the strains, reader doesnt know numbers in the 0,1% concentration of Cu and Zn in the culture scale. It turns out that this concentration was completely hazardous with respect to the growth of those bacterial strains. Considering all the heavy metals under analysis, it was found that Cu had the most hazardous effect on the growth of 4 bacterial strains, then Zn and Pb. Under the influence of 4 bacterial strains, the content of the metals that after 7- day long incubation remained is different depending on metal and bacterial strain. Removing Heavy Metals by Bacteria from Water solutions Heavy Metals by Bacteria from Water solutions: Pb (34,38%), then Cu (29,69%) and Zn (21,88%). The content of the heavy metals removing by 4 strains was from 65,62% to 78,12%. The biggest amount removing was for Zn (78,12%) and the smallest for Zn (65,62%).<br/><br/>
Authors and Affiliations
N. T. B Loc
Removal of priority PAHs from coking wastewater
The purpose of these tests described in this study was to determine the effectiveness of removing eight aromatic compounds from the list of priority. Tests were carried out using coke produced during wastewater treatment...
HYGIENE CONDITION OF WATER USE AND SANITATION FACILITIES AT URBAN SLUMS: ANALYSIS OF PORT CITY CHITTAGONG, BANGLADESH
Low income community development is the prerequisite for the overall development of a society. There are different kinds of parameters to widen community development, such as health, economic, social, a living pattern, e...
On determination of the stress-strain state of a multi-wedge system with thin radial defects under antiplane deformation
An elastic isotropic multi-wedge system with radially located thin defects under longitudinal shear is considered. The procedure of construction of asymptotics of the stress and displacement fields in the vicinity of the...
DEVELOPMENT OF SHEAR CONNECTIONS IN STEELCONCRETE COMPOSITE STRUCTURES
Different types of shear connectors and modelling techniques are presented. Basic research conducted or presented after year 2000 is taken into consideration, following the idea of concrete dowel implemented in the form...
THE ROLE AND EFFECTIVENESS OF THE MBT INSTALLATION IN POLAND BASED ON SELECTED EXAMPLES
The paper presents examples of installations for the mechanical and biological treatment of municipal waste in Poland. Each of the presented installations is defined as a regional municipal waste treatment installation (...