Effects of applied voltage and flow rates of ozone generator fed by dry air and O2 on the coaxial wire-cylinder reactor by varying various electrodes parameters
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2014, Vol 4, Issue 9
Abstract
Production of ozone is one of the most typical industrial and commercial applications. The ozone generator was designed according to the coaxial wire-cylinder reactor with pure oxygen gas and atmospheric air as feed gases for ozone production. The effect of the flow rate and discharge voltage on the concentration of the ozone were studied, the applied voltage was varied from (1- 9 kV) for two values of the gap space between electrodes D= 2 and 4 mm, and two values of the electrode area Ae= 20 and 36 cm2. It is found that the concentration of ozone increases with increasing discharge voltage and area of electrode and decrease with increasing flow gas rate and gap space.
Authors and Affiliations
Hamid. H. Murbat
Keywords
Related Articles
- EP ID EP110821
- DOI -
- Views 104
- Downloads 0
Optimal Location and Sizing of DG using Fuzzy logic
Introduction of distributed generation modifies the structure of power system network. High levels of penetration of distributed generation (DG) are new challenges for traditional electric power systems. A powe...
Groundwater Quality Evaluation in Thal Doab of Indus Basin of Pakistan
Indus Basin is typical model of conjunctive use of surface and groundwater. A well transmissive continuous and deep alluvium Indus PlainAquifer (IPA)is underlain by world’s largest contiguous Indus Basin Irrigation Syste...
Synthesis and Characterization of Mn, Ce Co-Doped CDS Nanoparticles Synthesized Via Co-Precipitation Method
Mn, Ce co-doped CdS nanoparticles were prepared by chemical co-precipitation method at room temperature. The prepared samples were characterized by X- ray diffraction (XRD), scanning electron microscopy (SEM), energy dis...
Crack Detection of Ferromagnetic Materials through Non Destructive Testing Methodology
The real components have so many defects in the material, which acts as a crack. In fact, manufacturing of a component is not ideal. In manufacturing several kinds of defects are generated like voids and inclusio...
ris Segmentation: a survey
The use of biometric systems has been increasingly encouraged by both government and private entities in order to replace or improve traditional security systems. Iris recognition biometric systems have proved to b...