Efficiency of Planetary Gear Trains as Criterion for Optimal Solution Selection
Journal Title: Machine Design - Year 2018, Vol 10, Issue 3
Abstract
Efficiency is one of the important criteria for the design and evaluation of the construction quality. Power losses in planetary transmissions consist of losses in the gear contact, losses in bearings, losses in sealings, losses due to oil viscosity etc.The calculation of the gear transmission efficiency is generally confined to losses depending on friction on tooth sides, i.e. on the calculation of contact power losses. Nevertheless, it is not suitable for using efficiency as only criterion for optimal solution choice, but as a one of the set of criteria. The objective of this paper, is the application of multicriteria optimization to the planetary gear trains with efficiency as one of the criteria. Apart the determination of the set of the Pareto optimal solutions, the weighted coefficient method for choosing an optimal solution from this set is included in order to prioritize particular criterion.
Authors and Affiliations
Jelena Stefanović-Marinović, Sanjin Troha, Boban ANĐELKOVIĆ, Miloš Milovančević
Keywords
Related Articles
- EP ID EP566937
- DOI 10.24867/MD.10.2018.3.93-98
- Views 105
- Downloads 0
3D Modelling and Aerodynamic Simulation of a Passenger Car
The shape of a passenger car is very important, both in terms of vehicle dynamics and for winning the leading position on the market. The vehicle's aerodynamics greatly affects fuel consumption, vehicle stability and saf...
Geometry of Human Body Model Used for Simulation of Thermal Comfort in an Agricultural Vehicle
In order to investigate thermal conditions inside a vehicle cabin, some kind of human body model is necessary. Apart from the chosen thermal sensation model, the model of the human body must have an appropriate geometry...
The Influence of the Design Flow Rate on the Economical and Ecological Aspects of SHP - Small Hydropower Plants
The negative impacts of the design flow rate, as one of the most significant design parameters of SHP, are analyzed. It is shown that the negative influence of this parameter on the local as well as on state level is mai...
Analysis of Cam Phasing Influence on Performance of Internal Combustion Engine
In this paper was presented influence of cam phasing on performance of overall engine torque. Simulation was performed in GT-Power software. Results shows that with optimisation of cam phasing higher engine output torque...
Redesign of Robotic Arm by the Application of Reverse Engineering and Rapid Prototyping
Application of reverse engineering (RE) methodology has been used for many years and has found success in different applications connected to product (re)design. The main goal of the presented study was to redesign the r...