Electromagnetic Strip Mills' Driving Rollers Metallisation Advanced Technics
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2007, Vol 30, Issue 2
Abstract
The continuous increase of the applications of thermal sprayed coatings together with the demand for layers having always more and more enhanced performances and properties stimulates the research activity toward the development of new coating materials and alloys. To meet this goal, new complex alloys, based on the Fe, Si, B, Mo, Cu, W system, are here considered, through the development of new and innovative powders to be used, as powders directly or as a wire form, for thermal sprayed coatings to improve wear and corrosion resistance, as well as thermal fatigue properties of the electromagnetic strip mills' driving rollers, highlighting the materials performances and attaining economical and environmental advantages.
Authors and Affiliations
Petra MOTOIU, Daniela DUMITRESCU, Cornel FRATILA, Dacia TRUSCA
Keywords
Related Articles
- EP ID EP660957
- DOI -
- Views 67
- Downloads 0
Modification of Surface Properties by Laser Cladding with Ni–Cr–B–Fe–Al Alloy
The paper is focused on modification of surfaces properties by laser cladding. To follow the corrosion behavior in different media of laser cladding layers made of nickel based alloy Ni - Cr - B - Fe - Al. It was studied...
Composition of Syngas Produced by Gasification of Agricultural Residue Briquettes
This paper summarizes the results of an experimental study on the gasification of briquettes made from different agricultural residues. There were investigated the effects of operating parameters such as temperature and...
Predicting of Remaining Eutectic Carbide Content in W1.4855 Steel as Function of Carbon Content and Heat Treatment Parameters
The relationship between the carbon content of W1.4855 steel, and the parameters of heat treatment of solution quenching (maintaining time and maintaining temperature) is investigated. The obtained experimental data are...
Superficial Hardening with Pulse Laser Applied to ASTM A537 HSLA Steel
The surface hardening with YAG:Nd pulse laser is used to obtain a set of surfaces with different properties and it is based on the formation of a very fine martensite. The paper has been elaborated based on laboratory ex...
Analysis of Titanium Interface and Tungsten Exterior Layer Thickness Coated by Vibrator Electrode Method
The goal of this paper is to create metallic materials with superior functional performances. The layer obtained by electrode vibrator method must have a very good adherence on part surface and a high chemical and therma...