Electrotechnical Model of Conductivity of Lead Telluride, Obtained by Method of Powder Pressing
Journal Title: Фізика і хімія твердого тіла - Year 2018, Vol 19, Issue 2
Abstract
The results of study of thermoelectric properties of lead telluride obtained by method of powder pressing arepresented. A modified electrical model for interpreting the empirical dependences σ (T) is proposed, according towhich the compressed sample is represented by a system of crystallites with intergranular boundaries whoseproperties differ along and across the compression axis.
Authors and Affiliations
I. V. Horichok, M. O. Galushchak, T. O. Semko, O. M. Matkivsky, R. O. Dzumedzey
Keywords
Related Articles
- EP ID EP411351
- DOI 10.15330/pcss.19.2.147-150
- Views 49
- Downloads 0
Peculiarities in WC and W2C Eutectic Phases Dissolution in Interfacial Zones of Composites
Annotation: The structural and phase composition of dissolution-and-diffusion interfacial zones at the particle-matrix interfaces of the composites reinforced with W–C particles infiltrated by a molten iron-base binder h...
Thermal Conductivity Mechanisms in Compressed Thermoelectric Materials Based on A4B6 Compounds
The factors influencing the value of the thermal conductivity coefficient of thermoelectric materials based onlead telluride obtained by powder pressing method have been analyzed. The model is presented and its parameter...
Synthesis of Mesoporous Iron Oxides by Citrate Sol-Gel Method. II. Morphological Characteristics Control
The mechanism of mesoporous maghemite g-Fe2O3 by thermal decomposition of iron citrate hydrate was investigated and the influence of sol-gel synthesis conditions on its morphological characteristics was studied. It was s...
The Processes of Structure Formation in Condensates SnTe/mica Obtained by Method "Hot Wall"
Presented by results of AFM studies and electrical properties of vapor-phase condensates SnTe on fresh chipped (0001) single crystals of muscovite mica at deposition temperature TS = (100-250)°C. Shown that there is a me...
Novel Ti2CuCx and Ti3Cu2Cx Carbides Obtained by Sintering of Products of Mechanochemical Synthesis of Ti, Cu and Carbon Nanotubes
Mechanical alloying of the elemental powder mixture of titanium and copper (particle size of both powdersis about 40 μm, purity is not less than 99.6% wt. %) was performed in a high energy planetary ball mill to obtainTi...