EXPERIMENTAL DETERMINATION OF CHARACTERISTICS OF CRACK-RESISTANCE OF DISPERSE-STRENGTHENED COMPOSITES BASED ON NON-SATUTATED POLYESTERS
Journal Title: Journal of Mechanical Engineering Research & Developments (JMERD) - Year 2018, Vol 41, Issue 4
Abstract
Based on the series of tests for three-point bending of rectangular bars with central cuts on a universal test machine, using the compliance and K-methods, experimental values of the fracture toughness characteristics of the material under investigation were obtained. In this work, the characteristics of the fracture resistance of casting artificial stone (CAS) were determined. The obtained values of the mechanical characteristics of the material are comparable to those of the natural stone. As a result of the experiments, tension-compression diagrams for CAS and also the dependence of compliance from the relative length were obtained. Considering the substantial technological advantages of this composite, it is concluded that it is practical to use this material.
Authors and Affiliations
Alena Y. Ershova, Elena L. Kuznetsova, Mikhail I. Martirosov1, Lev N. Rabinskiy
Keywords
Related Articles
- EP ID EP434710
- DOI 10.26480/jmerd.04.2018.33.36
- Views 87
- Downloads 0
THE PROSPECTIVE PROCESSING LINE FOR THE PREPARATION OF COMPLETE FE ED FOR LONG-TERM STORAGE
An important condition for increasing the livestock production efficiency and production of livestock products and reducing their cost is full-value feeding, the provision to the farm animals complete multicomponent feed...
INVESTIGATION ON THE MECHANICAL PROPERTIES OF PLA & ITS COMPOSITE FABRICATED THROUGH ADVANCED FUSION PLASTIC MODELLING
Advanced Fusion plastic modelling (AFPM) based rapid prototyping (RP) technique was emerged as one of the potential Technologies for serving numerous three-dimensional product for tool design purposes. Primarily, Poly La...
APPLYING PHOTOELASTICITY WITH OPTICAL MAGNIFICATION METHOD TO INCREASE PRECISION OF DETERMINING FRINGE ORDER UNDER MONOCHROMATIC LIGHT
Photoelasticity method was used to measure strain and stress fields to address the precision problem of determining fringe order of loading and cracking and notch areas. In this study, microscope was used as an additiona...
A MINI REVIEW OF USING OLEOPHILIC SKIMMERS FOR OIL SPILL RECOVERY
Marine pollution due to spilled oil has become a major issue in the aquatic environment protection over the past decades. Externally, the spilled oil can penetrate animal feathers and fur resulting in decreasing the move...
EFFICIENT MODELLING AND SIMULATION OF WIND POWER USING ONLINE SEQUENTIAL LEARNING ALGORITHM FOR FEED FORWARD NETWORKS
In this paper, an online sequential learning algorithm known as online sequential extreme learning machine (OS ELM) is applied to simulate the power output of a wind turbine. The OS ELM is used both in 1-by-1 and chunk-b...