Experimental Investigation on Linseed Oil Methyl Ester Fuelled Diesel Engine
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 3
Abstract
The look for an alternative fuel has prompted numerous discoveries because of which a wide assortment of alternative energizes are accessible available to us now. On the basis of fossil fuel energizes around the world never just brought about the consumption of traditional sources of energy supplies. Transesterification is one of the technique which utilizes ethanol or methanol, within the sight of an impetus, for instance, catalyst like potassium hydroxide or sodium hydroxide in order to split the particle of the oil into a glycerol and ester. For compression ignition engines, the Methyl Ester of Linseed oil (MELSO) which is tolerating extending thought as an elective fuel. In the present research, raw linseed oil is changed into their particular methyl ester all the way through transesterification method. Biodiesel is a non-hazardous, eco-friendly and sustainable fuel with the possibility to lower the exhaust emissions of the engine. In the present exploration, the blends of altering proportions of linseed oil without transesterification and transesterification of linseed oil blends be used to run a single cylinder diesel engine with DC generator, furthermore evaluated the performance parameters of the biodiesel imitative from non-edible linseed oil in a diesel engine.
Authors and Affiliations
A. Jaswanth, G. S. Guru Dattatreya, N. Krishnarjuna Rao
Keywords
Related Articles
- EP ID EP621286
- DOI 10.24247/ijmperdjun2019165
- Views 92
- Downloads 0
Microstructural and Corrosion Studies by Immersion in 3.5wt % NaCl Environment on Mg-6Al-1Zn-XCa Alloy with Ca Addition and Aged at different Temperatures
The effect of aging at different temperatures of 180ºC, 200ºC, 220ºC, and 240º C with various level of calcium (X=0.5, 1, 1.5, 2%) addition on Mg-6Al-1Zn-XCa alloy were investigated in 3.5Wt.% NaCl solution. The specimen...
The Numerical Analysis of Marine-Ship Propeller
In this paper, numerical simulationwas done to decide the hydrodynamic qualities in a cavitatingviscous stream of the standard INSEAN E779A in single and couple propeller arrangement utilizing cavitation show executed in...
Experimental Investigation of the Performance of Internal Combustion Engine by Water/Methanol Injection
This project deals with the development and testing of IC engine using methanol with a water injection system. Nowadays there are many types of fuel injection for example throttle body injection, common rail direct injec...
CFD Analysis of Cryogenic Helical Coiled Shell and Tube Heat Exchanger
Present study deals with the CFD (computational fluid dynamics) analysis of helical coil - shell and tube counter flow heat exchanger, which is used in cryogenic applications owing its compact construction and larger hea...
Buckling Analysis of Stiffened Composite Panels for Different Ply Orientations
Buckling and post-buckling analysis was performed on composite stiffened panel using Abaqus/CAE to obtain the critical load and modes of failures, with different parameters like ply orientation, different composite mater...