Experimental study into optimal interdependence of energy-time costs for emptying a dry dock
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 4, Issue 2
Abstract
<p>The influence of discrete properties of the microprocessor control systems based on Arduino Due on the accuracy of the physical model of the dock pumping station by modeling in MATLAB was assessed. In this case, such factors were taken into account as the PWC switching period, the quantization pitch by level and by time of ADC and DAC of the microprocessor, the time of the program cycle execution, noise of the least significant discharges of ADC, noise and inertia of the current sensor, as well as deviation of parameters of capacitive filters, included in the feedback channels by voltage, from the nominal values, load the converter and voltage drop at the terminals of the battery.</p><p>The results of calculations revealed that this influence can be neglected and the data, collected using a physical model of the dock pumping station, are reliable. Through physical simulation, the experimental correlation between energy-time costs of emptying the chamber of a dry dock was obtained, which proves the possibility of significant energy saving when the process is optimized by the appropriate criterion. It became possible thanks to multiple numerical solution of the edge problem directly on a physical model. The obtained characteristic suggests that at a short time of the process of chamber emptying, energy saving, which is achieved through optimal control of an electric drive of the pump, is relatively small compared with the option of an unregulated electric drive. However, at dragging out the process, it can reach the values at the level of 13 %. It is also noteworthy that beginning from some value of time of dry dock chamber emptying, the energy practically does not change, which makes it rational to introduce an idle pause in the law of optimal control of the object.</p><p>Thus, the possibility and feasibility of optimizing the process of dry (bulk – liquid) dock chamber emptying by the energy consumption criterion was proved experimentally.</p>
Authors and Affiliations
Pavel Khristo
Keywords
Related Articles
- EP ID EP528056
- DOI 10.15587/1729-4061.2018.139674
- Views 71
- Downloads 0
Investigation of multiple contact interaction of elements of shearing dies
<p>When justifying the design parameters, it is necessary to carry out the analysis of the strain-strain state of individual elements of technological systems, which are sets of parts under contact interaction conditions...
Improvement of the method for analysis of nonlinear electrotechnical systems based on the small parameter method
<em>The small parameter method, implemented in frequency domain, was used for the analytical analysis of nonlinear electrical circuits of electrotechnical systems. To have the possibility of calculations in frequency dom...
Development of a selfdiagnostics subsystem of the informationmeasuring system using anfis controllers
<p>A hybrid self-diagnostic system was designed to evaluate correctness of functioning of sensors of the information-measuring system of testing hydraulic transmissions of diesel locomotives of UHP 750 type. The system f...
Development of hardware and software for calculation and monitoring of the unbalance factor in threephase voltage system
<p>Hardware and software for measuring and monitoring the unbalance factor of the three-phase voltage system is developed. The shortcomings of the existing technical and software solutions for calculating the unbalance f...
Studying the authenticity of the golden element from a mongolian warrior's armor by physicalchemical methods
<p>We report results from an expert study into the historical artifact of the XIV–XV centuries ‒ the golden armor element of a Mongol warrior. The obtained results allowed us to establish signs of authenticity in the his...