Experimental tensile testing of steel belts for linter machine gaskets
Journal Title: Modern Innovations, Systems and Technologies - Year 2023, Vol 3, Issue 1
Abstract
The article presents the results of an experimental study of steel welded belts between saw blades of a 5LP linter machine under tension. The WAW-1000D universal testing machine was used to determine the practical tensile strength of welded steel belts (St3) between the saw blades of the 5 LP linter machine. Analysis of the results of experimental studies of welded steel belts between saw blades with a thickness of 1.5 mm and 2 mm using electric arc welding and kempi – showed that, in order to stretch welded belts up to 5 mm, 2820 N is necessary for a sample of 1.5 mm under arc welding and kempi 2900 N, and for a sample of 2 mm, it is necessary 3260 N for electric arc and 4440 N for kampi welding. The results of studies of welded belts under tension make it possible to use gaskets of electric arc and kampi, when welding steel belts. The preference is given to the technology of welding belts of steel gaskets using an electric arc in a carbon dioxide environment - kempi since it provides a minimum thermal stress in the welding zone.
Authors and Affiliations
D. M. Mukhammadiev, F. Kh. Ibragimov, O. Kh. Abzoirov, B. Kh. Primov, L. Yu. Zhamolova
Keywords
Related Articles
- EP ID EP716511
- DOI 10.47813/2782-2818-2023-3-1-0101-0111
- Views 56
- Downloads 0
Calculation of the stability of the inter-saw gasket under compression
The article presents the results of calculating the stability of the inter-saw gasket under compression for a 5LP linter machine. An increase in the value of the number of half-waves for steel St3 (n=0.4672) from aluminu...
Water-saving irrigation technology in the foothill areas in the south of the Republic of Uzbekistan
The article presents the results of research that are devoted to water-saving irrigation technology on steep slopes and clarified the elements of irrigation techniques at contour irrigation and discrete irrigation in the...
Ion-plasma nitriding of disc saws of the fiber-extracting machine
The technology of deep ion-plasma nitriding has been developed in this article and its practical implementation for disc saws made of U8G steel has been carried out. The technology of deep ion-plasma nitriding was implem...
Methods of remote sensing of the earth in the forest industry
The article considers technologies for remote sensing of the Earth and their applicability in the field of forest protection. The technologies of satellite monitoring, the use of unmanned aerial vehicles, stationary vide...
Automation of the storage of operational information of the collector-beam system for collecting products for its control
Within the framework of this work, a model for storing operational information of a collector-beam system for collecting products from the Orenburg gas condensate field for its management is proposed. A feature of the pr...