Features of reinforced concrete beams stress strain state, damaged under load
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2017, Vol 1, Issue 69
Abstract
The results of experimental research of reinforced concrete beams deformability with damage in tensile reinforcement, at different load levels are presented in this article. The purpose of this study is to investigate the change of the stress-strain state in reinforced concrete beams, with damages performed at different levels of initial loading. According to the investigation program, ten prototypes were tested: four – control and six ‒ damaged. Damage was made locally, drilling a hole step-by-step in the tensile reinforcement. The specimens were damaged at loading levels of 0.3, 0.5 and 0.7 from the carrying capacity of the control prototypes. According to the obtained data, graphs of deformations distribution in the central section are constructed: for compressed concrete, tensile reinforcement and for central cross section by the height. It was found out that the bearing capacity in the control samples is exhausted with the limiting deformations of the compressed concrete zone, and in the damaged specimens – with the limiting deformations of the tensile reinforcement.
Authors and Affiliations
Z. Z. , Blikharskyy, P. I. , Vehera, T. M. , Shnal
Engineering assessment method of reliability indexes of steel trusses bars
The simplest methods of evaluating reliability indicators of building structures elements based on the representation of the strength characteristics and stress in the form of random variables do not take into account th...
Experimental determination of the wetting contact angle in nanomodified ceramic glaze
The article deals with the classification of nanomaterials and the possibilities of their use in manufacture of construction ceramics and ceramic glaze. The research is aimed at determining possible ways of applying nano...
Urban agglomerations: legislative initiative proposition
The article is devoted to the definition of "urban agglomeration" and distinguishing it from close in essence concepts in the light of the urbanization general trend and the creation of new municipal facilities, which ne...
Influence of quantity and quality of the filler on technological damage of beam samples
The influence of the quantity and quality of the filler on the technological damage of beam samples is considered in the article. Physical and technical properties of composite building materials and structures are large...
Experimental investigations of the rebated connection of the thin-walled galvanized constructions
The aim of this article is to increase the experimental scientific data, these data are used to develop new constructions. The article analyzes the connections that can be used to create ultra-light steel reinforced conc...