Five Channel Temperature Calibrator Using Thermocouple Sensors Equipped With Data Storage
Journal Title: Journal of Electronics, Electromedical Engineering, and Medical Informatics - Year 2019, Vol 1, Issue 1
Abstract
A temperature calibration device is a tool used to measure the accuracy of a temperature-related device such as a Sterilizer. This temperature calibration device is needed when the temperature in the Sterilizer is not linear. In this calibration tool, the sensor used is a type-k thermocouple that is inserted into the media to be measured then the temperature results will be read. This tool is designed using pre-experimental methods with the type of after only design research. In this tool is equipped with storage on the micro sd card and also conversion mode to convert temperature results from Celsius to Reaumur, Fahrenheit, and Kelvin. Temperature results will be displayed on a 4x20 LCD and processed using Arduino UNO. This module can be used in medical equipment calibration laboratories. After testing the thesis module with a comparison device from BPFK, the biggest error is obtained at 1% at 50 ° Celsius, 100 ° Celsius, and 150 ° Celsius. The smallest percentage of error is 0% at 50 ° Celsius and 150 ° Celsius. It can be concluded that the tool "Temperature Calibrator (5 Channels) Using Thermocouple Equipped with Data Storage.
Authors and Affiliations
Rizkiyatussani Rizkiyatussani, Her Gumiwang Ariswati, Syaifudin Syaifudin
Keywords
Related Articles
- EP ID EP614878
- DOI 10.35882/jeeemi.v1i1.1
- Views 96
- Downloads 0
Phototherapy Radiometer with AS7262 Sensor
The phototherapy is a device used in hyperbilirubinemia therapy by using blue light radiation with ranges between 425nm-475nm. The effectiveness of hyperbilirubinemia therapy depends on the amount of energy emitted by li...
Electrosurgery Unit Monopolar Equipped with Cutting and Coagulation Function
Electrosurgery Unit is a medical device that utilizes high frequency and voltage used to cut and dry tissue during the surgical process. The purpose of making this tool is to damage certain body tissues by heating the ti...
Waterbath Design equipped With Temperature Distribution Monitor (Temperature and Timer Control Parameters)
Waterbath is a device used to create a constant temperature. This tool is used to incubates in microbiology analysis. Temperature is maintained according to the desired range. The heating element is controlled by the hea...
Portable Pulse Oximeter
Pulse oximeter is a tool to monitor oxygen saturation in the blood (arteries) and also a person's heart rate (BPM) without having to go through blood analysis. Lack or excess of oxygen in the blood will cause illness and...
The Design of Oxygen Concentration and Oxygen Flow Rate in Continuous Positive Airway Pressure
Measuring oxygen concentration and measuring the flow of oxygen is a tool used to measure the percentage of oxygen content and oxygen flow rate in CPAP. This tool uses the OCS-03F sensor, with Arduino NANO processors the...