Forces at Internal Combustion Engines
Journal Title: American Journal of Engineering and Applied Sciences - Year 2017, Vol 10, Issue 2
Abstract
Abstract The paper presents an algorithm to set the parameters of the dynamics of the classic mechanism the main of internal combustion. It shows the distribution of the forces (on the main mechanism of the engine) on engines with internal combustion. Dynamic, the gears can be distributed in the same way as forces. Practically, in the dynamic regimes, the velocities have the same synchronization as forces. The method shall be applied separately for two distinct situations: When the engine is working on a compressor and in the system of the motor. For the two individual cases, two independent formulae are obtained for the dynamic cinematic forces (gearbox). The calculations shall be made for an engine with a single cylinder. The change of speed in the dynamics feels like a variation of the angular speed of the engine. It is more difficult to be taken into account (theoretically) effect on engine with several cylinders. Copyright © 2017 Relly Victoria V. Petrescu, Raffaella Aversa, Bilal Akash, Ronald B. Bucinell, Juan M. Corchado, Filippo Berto, MirMilad Mirsayar, John Kaiser Calautit, Antonio Apicella and Florian Ion T. Petrescu. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Authors and Affiliations
Relly Victoria V. Petrescu, Raffaella Aversa, Bilal Akash, Ronald B. Bucinell, Juan M. Corchado, Filippo Berto, MirMilad Mirsayar, John Kaiser Calautit, Antonio Apicella, Florian Ion T. Petrescu
Keywords
Related Articles
- EP ID EP194602
- DOI 10.3844/ajeassp.2017.382.393
- Views 87
- Downloads 0
End Discharge Relationship for Free Overfall Affected by Upstream Bed Roughness and Slope
Abstract The experimental program of this paper was restricted to free vertical drop structure at the end of the rectangular channel. The roughness and slope of the bed of approach channel are the aim of this study to s...
Dynamic Mechanical Properties of Fused Deposition Modelling Processed Polyphenylsulfone Material
Dynamic Mechanical Properties of Fused Deposition Modelling Processed Polyphenylsulfone Material Bolin Huang, S.H. Masood, Mostafa Nikzad, Prabhu Raja Venugopal and Adhiyamaan Arivazhagan DOI : 10.3844/ajeassp.2016.1.11...
The Optimization of a Porous Ti6Al4V Bone Construct Using Additive Manufacturing
Abstract Patient specific implants are becoming viable treatment options in some orthopaedic applications through advances in additive manufacturing and 3D printing techniques. One potential application is for treatment...
Correlation of Biodiversity of Algal Genera with Special Reference to the Waste Water Effluents from Industries
Abstract Pollution is the introduction of contaminants, which cause adverse change, into the natural environment and mainly from external inputs like sewage, waste from industries, oil spills and agricultural use of pes...
Multi-Objective Optimization of FRP Jackets for Improving the Seismic Response of Reinforced Concrete Frames
Abstract In this study, a multi-objective Genetic Algorithm (GA) optimization procedure is proposed for the seismic retrofitting of Reinforced Concrete (RC) building frames via Fiber-Reinforced Polymer (FRP) jackets. Th...