Foundry Coatings - Review
Journal Title: Journal of Materials and Engineering - Year 2023, Vol 1, Issue 1
Abstract
The main purpose of this publication is to present the founding stages of the foundry industry and its fundamental importance to the engineering sector. The second focus is to examine the technology of casting in sand molds and more specifically those based on no-bake process(chemically hardening). The auxiliary materials used for the production of sand molds and their importance for the quality of the final part-casting are examined in detail. Special attention is paid to refractory coatings, and in particular those with graphite filler, because of their wide application. The main chemical parameters are presented and the need to study their geometric and tribological characteristics and their influence on the quality of manufactured castings is emphasized. Until now, the author of the publication has studied the micro hardness, roughness, friability and gas permeability of refractory coatings, for which parameters no previous information on similar tests has been found. The research carried out was financed under phd project No. 222ПД0005-05 – TU Sofia, Bulgaria.
Authors and Affiliations
Gergana Milanova
Keywords
Related Articles
- EP ID EP727407
- DOI 10.61552/JME.2023.01.006
- Views 64
- Downloads 1
Empirical Modeling Methods of Turning Process: A Review
This paper presents a review of the modeling methods which are widely used for empirical modeling of turning process. The review considered the scientific publications from renowned scientific resource bases from 2018 un...
Triboinformatic Modeling of Wear in Total Knee Replacement Implants Using Machine Learning Algorithms
Pin-on-disk (PoD) tests, the most prevalent studies, are being carried out in order to evaluate tribological behaviour of different bearing materials. However, the comparison of results obtained from the PoD tests is ver...
Taguchi and Regression Analysis of Abrasive Wear Behavior of Carbon Epoxy Composite
This study aimed to assess the abrasive wear performance of a composite material made of carbon epoxy and graphite particles. The experiments were conducted on Abrasion Test rig and examined the weight loss of the compos...
Statistical Modeling and Optimization of Surface Roughness for PLA and PLA/Wood FDM Fabricated Items
During last decades fused deposition modeling (FDM) has emerged as a widely applied additive manufacturing technology for numerous engineering applications. The present work investigates the effects of two independent va...
Tribological Behavior of Cast Aluminum Matrix Composites After Multiple Remelting
One of the limiting factors for expanding the applications of aluminum alloy castings in many high-tech industries is the insufficient level of tribological properties, especially under conditions of dry and abrasive wea...