Taguchi and Regression Analysis of Abrasive Wear Behavior of Carbon Epoxy Composite
Journal Title: Journal of Materials and Engineering - Year 2023, Vol 1, Issue 2
Abstract
This study aimed to assess the abrasive wear performance of a composite material made of carbon epoxy and graphite particles. The experiments were conducted on Abrasion Test rig and examined the weight loss of the composite material, taking into account the sliding distance and normal load. Taguchi method is employed to study the effect of process parameters on composite wear. Multiple regressions were utilized to establish a correlation between wear and wear parameters. The findings indicated that weight loss increased with higher applied loads, sliding distances, and weight fractions of graphite filler. Finally, the experimental results were validated through confirmation tests.
Authors and Affiliations
Sudarshan Rao K.
Keywords
Related Articles
- EP ID EP727410
- DOI 10.61552/JME.2023.02.003
- Views 48
- Downloads 1
FOOD PRODUCTS DEFILEMENT ANALYZER USING IOT
In order to make additional, quick profits, shopkeepers frequently adulterate food today. Foods are adulterated by adding things like ripening mangoes, chalk powder to turmeric, starch to curry powder, papaya seeds to bl...
The Technological Factors and Operating Conditions Influence on the Molybdenum Disulfide Coatings Tribological Properties
Molybdenum disulfide is a widely used solid lubricant operates successfully under extreme conditions such as vacuum, high or low temperatures, high loads etc. Magnetron sputtering is one of the most common method of appl...
Effects of Applied Loads and Aluminium Nanoparticle Additions on Wear Resistance Properties of Particle Reinforced Epoxy Nanocomposites
The recent technology advancement has emerged aluminium nanoparticles for polymer reinforcements. Mechanical properties of epoxy containing aluminium nanoparticle was reported but its wear resistance is left unstudied. T...
Increase of Wear and Heat Resistance of the AISI 304 Steel Surface Layer by Multi-Pass Nanostructuring Burnishing
The paper presents the results of experimental studies of the AISI 304 steel disc surface after finishing turning, electropolishing and nanostructuring burnishing after one and five passes of the tool with a natural diam...
The Mystery and Clarity of Leonardo da Vinci's Coefficient of Friction
The science of friction has been using the coefficient of friction as the main quantitative characteristic of the friction process for more than five centuries. The concept of the coefficient of friction as a characteris...