Gears-Part I
Journal Title: American Journal of Engineering and Applied Sciences - Year 2017, Vol 10, Issue 2
Abstract
Abstract The gears are today the most widespread and most frequently used mechanical transmissions, all over the world. They must be the factory on an industrial scale, everywhere and have a variety of uses, being extremely important for both the heavy machines of industrial buildings, as well as for domestic appliances, electronics, etc. meet the excessive size normal, big or even huge (used from ships, heavy machines or in energy), but also for the tools watches, or for devices of sizes micro. The work of front wishes to make an overview of the tools and then an introduction to the study of their general and a study customized for gears with fixed. The methods listed for the gears with fixed, can then be customized and used and the gears Planetary Drive (with axis elements). The work of the front and the original components, very much, such as: Geometry, forces, velocities, powers, outputs (gears), which form part of the actual dynamics of the mechanisms and also the most important criterion in respect of the performance of a mechanism. Copyright © 2017 Relly Victoria V. Petrescu, Raffaella Aversa, Bilal Akash, Ronald B. Bucinell, Juan M. Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion T. Petrescu. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Authors and Affiliations
Relly Victoria V. Petrescu, Raffaella Aversa, Bilal Akash, Ronald B. Bucinell, Juan M. Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella, Florian Ion T. Petrescu
Keywords
Related Articles
- EP ID EP194624
- DOI 10.3844/ajeassp.2017.457.472
- Views 107
- Downloads 0
Prediction of Residual Axial Load Carrying Capacity of Reinforced Concrete (RC) Columns Subjected to Extreme Dynamic Loads
Abstract The evaluation of residual axial load carrying capacity of Reinforced Concrete (RC) columns to explosion load is significant for protection of buildings. The few investigations conducted on residual axial load...
Optimization and Prediction of Motorcycle Injection System Performance with Feed-Forward Back-Propagation Method Artificial Neural Network (ANN)
Optimization and Prediction of Motorcycle Injection System Performance with Feed-Forward Back-Propagation Method Artificial Neural Network (ANN) La Ode Ichlas Syahrullah and Nazaruddin Sinaga DOI : 10.3844/ajeassp.2016....
A Conceptualization of Distributed Computation for Machine Learning: The Voting Algorithm
Abstract This paper describes a voting algorithm that can be used to find the most optimal solution to clustering problems in machine learning. As part of the family of algorithms known as Condorcet methods, the voting...
Study of the Parameters of Steam Assisted Gravity Drainage (SAGD) Method for Enhanced Oil Recovery in a Heavy Oil Fractured Carbonate Reservoir
Abstract By increasing in the use of nonrenewable energy and decreasing in discovering hydrocarbonic reservoirs, in near future the world will encounter with a new challenge in the field of energy, so increase in recove...
End Discharge Relationship for Free Overfall Affected by Upstream Bed Roughness and Slope
Abstract The experimental program of this paper was restricted to free vertical drop structure at the end of the rectangular channel. The roughness and slope of the bed of approach channel are the aim of this study to s...