Optimization and Prediction of Motorcycle Injection System Performance with Feed-Forward Back-Propagation Method Artificial Neural Network (ANN)
Journal Title: American Journal of Engineering and Applied Sciences - Year 2016, Vol 9, Issue 2
Abstract
Optimization and Prediction of Motorcycle Injection System Performance with Feed-Forward Back-Propagation Method Artificial Neural Network (ANN) La Ode Ichlas Syahrullah and Nazaruddin Sinaga DOI : 10.3844/ajeassp.2016.222.235 American Journal of Engineering and Applied Sciences Volume 9, Issue 2 Pages 222-235 Abstract This research studied the use of Artificial Neural Network (ANN) using feed-forward back-propagation model to optimize and predict the performance of a motorcycle fuel injection systems of gasoline. The parameters such as speed, throttle position, ignition timing and injection timing is used as the input parameters. While the parameters of fuel consumption and engine torque is used as the output layer. Lavenberg-Marquardt model type with train function tanh sigmoid and 25 neurons number is used to generate the target value and the desired output. Variation of ignition timing as optimization variable in a wide range of speed and throttle position is used in experimental tests. ANN is used to investigate the prediction of performance motorcycle engines and compared with the test results. Results showed that the operation of ANN in predicting engine performance is very good. From the test results obtained a smooth contour MAP compared to the initial state. The prediction result and performance test show a good correlation in small error value of training and test that is regression with range 0.98-0.99, mean relative error with range 0.1315-0.4281% and the root mean square error with range 0.2422-0.9754%. This study shows that the feed-forward back propagation on ANN model can be used to predict accurately the performance of a motorcycle engine injection system. Copyright © 2016 La Ode Ichlas Syahrullah and Nazaruddin Sinaga. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. http://thescipub.com/abstract/10.3844/ajeassp.2016.222.235
Authors and Affiliations
La Ode Ichlas Syahrullah, Nazaruddin Sinaga
Keywords
Related Articles
- EP ID EP203589
- DOI 10.3844/ajeassp.2016.222.235
- Views 96
- Downloads 0
Energy Balance for a Diesel Engine Operates on a Pure Biodiesel, Diesel Fuel and Biodiesel-Diesel Blends
Abstract In general, small part of fuel chemical energy transforms to effective power in diesel engines and other parts are going as energy losses, there for many researchers, as well as engine designers, are searching...
The Use of Nano Silica for Improving Mechanical Properties of Hardened Cement Paste
The Use of Nano Silica for Improving Mechanical Properties of Hardened Cement Paste Intisar Kuli, Taher M. Abu-Lebdeh, Elham H. Fini and Sameer A. Hamoush DOI : 10.3844/ajeassp.2016.146.154 American Journal of Engineer...
Gears-Part I
Abstract The gears are today the most widespread and most frequently used mechanical transmissions, all over the world. They must be the factory on an industrial scale, everywhere and have a variety of uses, being extre...
Measuring Hydraulic Conductivity Using Geotechnical Centrifuge
Measuring Hydraulic Conductivity Using Geotechnical Centrifuge Nur Aishah Zarime and Wan Zuhairi Wan Yaacob DOI : 10.3844/ajeassp.2017.878.881 American Journal of Engineering and Applied Sciences Volume 10, Issue 4...
New Strategy to Optimize Lean Supply Chain Design by Meta-Heuristic
This paper aims at presenting one novel quantitative strategy of optimizing the design of Lean supply chain using Meta-Heuristics. While classifying Lean Manufacturing tools in two categories, namely Functional and Tier...