GSM-Microcontroller Based Remote Control of Sprinkler Irrigation
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2014, Vol 4, Issue 11
Abstract
GSM-Microcontroller based Remote Control of Sprinkler Irrigation is a new concept in the field of the irrigation for doing irrigation work remotely without any risk of accident due to electric shock , hard work and working in difficult environment condition. This system discards the conventional methods of irrigation work. In present work the author has designed and developed a automatic sprinkler irrigation system which is controlled and monitored by a microcontroller interfaced with display device , current flow sensor, solenoid valves and GSM modems. Given command to stop , start , interrupt and parameters under monitoring are stored in a memory based upon which microcontroller takes decision to run the system. Provision of protection against dry run and overload of motor coupled with centrifugal pump is also incorporated. Options using selector switches make this system compatible with single phase motor and three phase motor. It obsoletes the mechanical work of farmers by automatically changing over sprinkler water lines in sequence after running for a period of set time decided by farmer and switch off the water pump house motor upon completion of irrigation work using GSM modems interfaced with microcontrollers.
Authors and Affiliations
Jagdeep
Keywords
Related Articles
- EP ID EP89031
- DOI -
- Views 89
- Downloads 0
Accelerometer and EOG Based Wireless Gesture Controlled Robotic Arm
This paper deals with the Robotic arm controlled by arm and eye movements, where data is acquired through the use of accelerometer and EOG amplifier. The hand movements are captured by the Accelerometer and the...
CFD Analysis of Heat Transfer and Flow Characteristics in A 3D Cubic Enclosure
Flow arising “naturally” from the effect of density difference, resulting from temperature or concentration difference in a body force field such as gravity, the process is termed as natural convection. There h...
An Overview on Process Parameters Improvement in Wire Electrical Discharge Machining
The dimensional accuracy and quality of the surface of the machined piece are greatly influenced by the determination of optimal range of the Wire-Cut Electric Discharge Machining (WEDM) Parameters. Numerous res...
Bearing Life Improvement of Centrifugal Blowers by Vibration Analysis
This study work is proposed to carry out vibration analysis of heavy duty centrifugal Blowers & bearing failure analysis. The life of bearing can be improved by carrying corrective actions on blower & mod...
A review of Carbon Nanotube Reinforced Aluminium Composite and Functionally Graded composites as a Future material for Aerospace
Material selection is a very critical issue when it comes to aerospace engineering. Materials should have good qualities like light weight, high strength and corrosion resistance with economic viability. Over the p...