Heat Exchange between Thermometer Well and Pipe Wall in Natural Gas Metering Systems
Journal Title: Energy Engineering and Control Systems - Year 2015, Vol 1, Issue 1
Abstract
This paper deals with the accuracy of gas flow temperature measurement in natural gas metering systems. The effect of heat exchange between thermometer well and the pipe wall on the accuracy of gas flow temperature measurement is investigated. A mathematical model is proposed to calculate the additional systematic error of gas flow temperature measurement caused by heat exchange between thermometer well and the pipe wall. Calculation results were compared to the corresponding experimental values of this error. The maximum relative deviation of calculation results from experimental values does not exceed 6 %. The effect of gas flow temperature measurement error on the accuracy of gas flow rate and volume measurement is analyzed. Measures are proposed to minimize the additional systematic error of gas flow temperature measurement and to improve the accuracy of natural gas metering.
Authors and Affiliations
Roman Fedoryshyn, Fedir Matiko
Keywords
Related Articles
- EP ID EP253639
- DOI 10.23939/jeecs2015.01.043
- Views 94
- Downloads 0
Alternative Energy Source for Heating System of Woodworking Enterprise
At woodworking enterprises, there is a large amount of wood waste the energy potential of which can be used as an alternative source of energy for the generation of heat energy at boiler houses. Gasification is one of th...
The Method of Signal Processing when Measuring Non-stationary Values
Nowadays the problem of quick-changing non-stationary values measurement is extremely actual in various modern technical systems (parameters control of engine combustion chamber, testing of aerospace complex products, sc...
Construction of Empirical Models of Complex Oscillation Processes with Non-Multiple Frequencies Based on the Principles of Genetic Algorithms
A method for constructing the empirical models of complex processes has been developed on the basis of genetic algorithms which, compared to the inductive method of self-organization of models, significantly reduces comp...
Physical Modeling of Thermal Processes of the Air Solar Collector with Flow Turbulators
The analysis of existing systems of solar air heating has been carried out. The physical model of the solar air collector (SAC) with additionally installed flow turbulators, which are located in the air channel of the so...
Analytical Studies of Coolant Temperature in Solar Panel
An analysis of existing solar heating systems has been carried out. The dependence of the annual flow of solar radiation on the solar panel on the azimuthal angle γ and the angle of inclination of the surface, which can...