Horizontal Pendulum Performance Analysis with Multilevel Model Plate on Ocean Wave Electric Power Plant (PLTGL)
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2017, Vol 1, Issue 2
Abstract
With the times and the industry, the energy sources such as fossil fuels dwindling. It encourages all parties to be more advanced and developed by creating solutions to renewable energy generation with the latest innovations, one of which is the sea wave power plant - pendulum system. Ponton who uses pendulum system is one tool used to convert from ocean wave energy into electrical energy. In this study using the test conditions without using ballast onshore and off-shore testing with the ballasts. Obtained from testing the many rounds that can be generated pendulum pie plate thickness and the angle of the pontoon. To test the largest on-shore power obtained on the test using arc angle 30 °, 3 mm thick, the angle of 60o power produced 0036 watts. For testing offshore in the ballasts 12 cm, 15 cm, 17.5 cm, the largest power generated at 15 cm ballasts with 0041 watts power on pie, thick, and a tilt angle equal to the on-shore testing. Number of rounds with time, the on-shore testing that produces the greatest value in the segment with an angle of 30 °, a thickness of 3 mm the angle of 60o value obtained 0.938 rad / s. In the off-shore pengjuain is greatest in the ballasts 15 with 0847 rad / s.
Authors and Affiliations
Mukhtasor Mukhtasor, Irfan Syarif Arief, Tony Bambang Musriyadi
Keywords
Related Articles
- EP ID EP221253
- DOI 10.12962/j25481479.v1i2.1915
- Views 215
- Downloads 0
Application Waste Sawdust as Mixed Polyurethane Insulation in Traditional Cold Storage of Fishing Vessel
In the process of fishing it takes some supplies such as fishing equipment, instrumentation and storage of fish. The traditional fishermen of their fishing days fishing usually only bring ice cubes. Solid plastic polyure...
Analysis and Optimation Hydrofoil Supported Catamaran (HYSUCAT) Size 25 Meter based on CFD Method
In the field of transportation, ship is relatively cheap then others transportation. However, the ship still has constraints on speed and fuel consumption. Therefore, the ship has many variations of shape to achieve opti...
Design of Automatic Transfer Switch ACOS with Human Machine Interface Monitoring System in Shipboard Application
This paper concern about design ACOS with PLC system. The supply of electricity will move from the main generator to the battery when the main generator lost one phase, and the power supply will switch to the emergency g...
Experimental Study of Thermoelectric Generator as Electrical Source of Impressed Current Cathodic Protection for Ship Hull
Impressed Current Cathodic Protection (ICCP) is a method to protect metallic material such as ship hull from corrosion by using electric current. In this research, a prototype of thermoelectric generator is developed in...
Design of 100 MW LNG Floating Barge Power Plant
Floating bargepower plant able to supply amount of electricity to undeveloped island in Indonesia. In this research, the generator will be use in the power plant is dual-fuel engine. The process was determine the engine...