IDENTIFICATION OF THE PARAMETERS OF A BALL-SCREW MECHANISM MODEL
Journal Title: Archives of Mechanical Technology and Materials - Year 2015, Vol 35, Issue
Abstract
In this article a method for identification of the static properties of a ball-screw mechanism is shown. The nonlinearity of its deformation was shown experimentally. Then, a model of the mechanism was made and its parameters were identified. The experimental results were summarized and compared with calculations. Recommendations were made for the modeling of carrying units containing ball-screw mechanisms.
Authors and Affiliations
Michał Dolata, Daniel Jastrzębski
Keywords
Related Articles
- EP ID EP198806
- DOI -
- Views 68
- Downloads 0
Finite Element Analysis Of Influence of Flank Wear Evolution on Forces In Orthogonal Cutting of 42CrMo4 Steel
This paper presents analysis of flank wear influence on forces in orthogonal turning of 42CrMo4 steel and evaluates capacity of finite element model to provide such force values. Data about magnitude of feed and cutting...
IDENTIFICATION OF THE PARAMETERS OF A BALL-SCREW MECHANISM MODEL
In this article a method for identification of the static properties of a ball-screw mechanism is shown. The nonlinearity of its deformation was shown experimentally. Then, a model of the mechanism was made and its param...
Tribology of nitrided-coated steel-a review
Surface engineering such as surface treatment, coating, and surface modification are employed to increase surface hardness, minimize adhesion, and hence, to reduce friction and improve resistance to wear. To have optimal...
Open loop control of piezoelectric tube transducer
This paper is focused on the open loop control of a piezoelectric tube actuator, hindered by a strong hysteresis. The actuator was distinguished with 22 % hysteresis, which hinders the positioning of piezoelectric actuat...
Design of The Test Stand for Hydraulic Active Heave Compensation System
The article presented here described the design of a test stand for hydraulic active heave compensation system. The simulation of sea waves is realized by the use of hydraulic cylinder. A hydraulic motor is used for sea...