IMPEDANCE RESPONSE AND CHARACTERIZATION OF NANO POROUS CURRENT COLLECTOR

Journal Title: ICTACT Journal on Microelectronics - Year 2016, Vol 2, Issue 1

Abstract

Power crisis is the great concern in electrical charge storage devices. Electrochemical energy storage devices such as supercapacitors are the alternative power sources. Nanoporous gold film is the promising material for supercapacitor current collector fabrication. Nanoporous gold has recently become a desirable material in the field of analytical chemistry. This conductive material has an open, 3D porous structure consisting of nano sized pores with surface areas that are 100s to 1000s of times larger than planar gold of an equivalent surface area. The high surface area tied with an open pore network arrangement makes nanoporous gold a perfect support for the development of supercapacitor. Important features include conductivity, high surface area, ease of preparation and adaptation, tunable pore size, and a continuous open pore network. Nanoporous current collector for supercapacitor is prepared by dealloying Au:Cu alloys. Surface analysis and characterisation are performed by using SEM, FESEM and EDAX analysis. Mathematical modelling of impedance response for a nanoporous current collector is derived and equivalent circuit is also obtained. This current collector can store more charge carriers for large number of charging /discharging cycles and can be used in portable, high power applications.

Authors and Affiliations

Jeyaseeli Rashmi I, Prabhin V S

Keywords

Related Articles

DFAL BASED FLEXIBLE MULTI-MODULO PRESCALER

The quest to have longer battery life and reduced packaging cost has been motivating factor behind developing low power circuits for different applications. Research in adiabatic logic has recently gained momentum and di...

HIGH SPEED ONLINE FAULT DETECTION OF 64-BIT RIPPLE CARRY ADDER USING MODIFIED MODULAR REDUNDANCY

Developments in VLSI technology has increased density of chips so that, processing elements are capable of doing complex computations. The increase in complexity and density of the VLSI chip has made electronic systems m...

A COMPARATIVE STUDY OF DIFFERENT TYPES OF MIXER TOPOLOGIES

In this paper, a comparative study of different types of mixer topologies is presented. Gilbert cell is widely used as core of the mixer because it provides high conversion gain, good port-to-port isolation and low even-...

ANALYTICAL MODELLING OF LOW PRESSURE SINGLE BOSS SCULPTURED DIAPHRAGM AND ITS SENSITIVITY ENHANCEMENT

The low pressure is measured by using thin Sculptured diaphragm using micro system fabrication technology. The thickness of this diaphragm is reduced to improve sensitivity is achieved by boss like structure to increase...

A CONCURRENT ERROR DETECTION SCHEME FOR TOTALLY SELF CHECKING FPGA LOOK-UP TABLE

Field Programmable Gate Arrays are widely useful in mission critical applications. FPGAs have fixed architecture; it has the capability to change function in situ for a particular application. SRAM based FPGAs are vulner...

Download PDF file
  • EP ID EP198228
  • DOI 10.21917/ijme.2016.0035
  • Views 148
  • Downloads 0

How To Cite

Jeyaseeli Rashmi I, Prabhin V S (2016). IMPEDANCE RESPONSE AND CHARACTERIZATION OF NANO POROUS CURRENT COLLECTOR. ICTACT Journal on Microelectronics, 2(1), 203-209. https://europub.co.uk./articles/-A-198228