Improvement of the structure of floating docks based on the study into the stresseddeformed state of pontoon
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 6, Issue 7
Abstract
<p>We have investigated the stressed-deformed state of reinforced concrete slabs of the composite dock pontoon with a reduced number of framing sets. A refined estimation scheme was applied in the calculation of bending plates of the slipway-deck and pontoon bottom, which accounts for the work of reinforcement structure in both directions. Accounting for the work of reinforcement structures in both directions makes it possible to accurately estimate the structural strength and provide recommendations on their design in terms of material consumption and optimal size. When modeling work of concrete, we took into consideration that concrete at stretching has a less rigidity for stretching than for compression.</p><p>It has been shown that the developed design and construction technology of the composite dock with a reduced number of framing sets in the pontoon makes it possible to expand the technological capabilities of dock construction. The results derived from the calculations of cumulative stresses in the slabs of the dock's pontoon stack-deck showed that the actual safety factors meet the requirements for strength. Given that the structure of concrete slabs perceives the moment of resistance that is several times larger than that of steel, it becomes possible to increase the span of a slab and to erect less supports-bulkheads. The result would be the reduced material costs and the decreased labor intensity of operations at dock construction.</p>We have proposed a structure and a construction technology for a composite dock with a reduced number of framing sets in the pontoon. It has been shown that the erection of transverse bulkheads between the inner boards in 4 quadrats, that is, in 3 meters, as well as the absence of lack frames, and floors and beams, in concrete towers, makes it possible to reduce the amount of materials, as well as bring down the labor intensity of dock construction. This paper lists features for the selection of shipbuilding concrete intended to withstand extreme operating conditions of marine reinforced-concrete structures
Authors and Affiliations
Oleksandr Shchedrolosiev, Leontiy Korostylov, Serhii Klymenkov, Kostiantyn Kyrychenko
Evaluation of gas separator effect on operability of gas-motor piston compressor valves
<p>To increase the efficiency of gas-lift oil and gas production, it is necessary to improve the operation of compressor stations, namely, to increase the reliability of the gas-motor piston compressor units installed in...
Development of procedure to control flow distribution in water supply networks in real time
<p class="a">It is required to substantiate the method for determining the number of control nodes both during designing networks taking into consideration its supply, and in the process of its operation when hydraulic c...
Analysis of detection of ecological hazard based on computing the measures of current recurrence of ecosystem states
<p>Analysis of the early detection of an environmental hazard in ecosystems was performed. New measures of the current recurrence of states that allow their use for the early detection of an environmental hazard in ecosy...
Development and substantiation of the technology for producing structured olives containing the encapsulated olive oil
<p>The technology of the production of structured olive containing the encapsulated olive oil was developed and substantiated. The technology is based on the structuring methods with the use of ionotropic polysaccharides...
Examining a possibility of using purple amaranth in the technology for products made of yeast dough
<p>It was experimentally found that additives of purple amaranth (APA) have high enzyme activity, which is proved by high activity of the amylase complex: maltose number of 5 % water extract from dry foliage of purple am...