Improving durability of the coated end mill when machining titanium alloys due to bedding
Journal Title: Вісник Житомирського державного технологічного університету. Серія: Технічні науки - Year 2016, Vol 76, Issue 1
Abstract
The paper shows the results of the research of opportunities to increase the durability of the end coated mills when machining titanium alloys due to bedding. To this purpose the existing methods of improving the durability of tool materials are analyzed. It is noted that for the cemented carbide hardening before coating, the methods of surface hardening are widely used. In order to further improvement of tool durability by the example of milling alloy BT6 using carbide cutters, vibroabrasively machined before TiAlN coating. The possibility of further durability increase of the instrument due to bedding in «Promoledge 9 %» technological environment is examined. It was supplied to the cutting zone with minimum lubrication method. Bedding was carried out under the following conditions: Sz = 0,03 and Sz = 0,05 mm/tooth, t = 1 mm; V = 10 m/min., V = 15 m/min., V = 20 m/min., V = 25 m/min. The research shows that the recommended speed to further increase of the durability of end mills is V = 20 m/min. In this case, there is a durability increase when applying Sz = 0,03 mm / tooth to 1,5 times and at Sz = 0,05 mm / tooth – 2 times.
Authors and Affiliations
Yu. Y. Besarabets, B. N. Seredenko, E. R. Vaniiev
Keywords
Related Articles
- EP ID EP253413
- DOI -
- Views 172
- Downloads 0
Adaptive slicing 3d model of product in additive technologies
A study on the possibilities of adaptive slicing initial 3D model (given by the STL-file) is presented in the forming of product by additive technologies. The proposed method of adaptive slicing 3D model allows to increa...
Investigation of the influence of the metal excipient of the termite charge on the qualitative parameters of the alloy, deposited by the IMS method
For surfacing the coating on the surface of metal products, welding is usually used. This process is time-consuming, takes a lot of time and does not allow you to simultaneously receive connections across the entire prod...
Description of the front automobile collision in a model of the system of nonlinear oscillators
The article reviewed the automobile collision process on the basis of a mathematical model of nonlinear interacting oscillators. A mathematical model for research of the front collision automobile extends to the limit of...
Changes in Kyiv’s geology regarding the technogeneous impact on soils
Issues of the strength of the soil foundations and their deformation properties that directly affect the bearing capacity of the foundation are essential for the development of geotechnical construction in difficult cond...
Effect of the tangent of the cutting blade on the performance of machining
The kinematic schemes of turning with a blade tool with tangential displacement of the cutting blade are considered. Methods are shown for reducing the tension of the cutting process due to interruption and periodization...