Improving the effectiveness of detailed processing by dynamic control of processing with high sports range
Journal Title: Вісник Житомирського державного технологічного університету. Серія: Технічні науки - Year 2017, Vol 80, Issue 2
Abstract
In this article the possibility of increasing the efficiency of the processing of parts with a diameter of up to 20 mm is analyzed, namely: vibration resistance of the cutting process at pinching due to cutting speed control in the processing, forecasting and selection of rotational frequencies, which ensure the stability of the processing system, controlling the dynamics of the process of displacement of the additional mass. The method of investigation of vibration processes during the sharpening is developed. As a result of the processing of experimental data, it was found that when an oscillatory motion is applied to the spindle rotation, the overall level of oscillation decreases, which is reflected on the quality of the treated surface. The choice of a previously known spindle rotation frequency range at which the lowest value of the oscillation amplitude of the instrument is observed in the radial direction to the detail part, allows you to increase the processing efficiency while maintaining the drawing requirements for roughness by increasing the spindle rotational speed. The combination of the node of the own forms of oscillation and the cutting zone, by dynamically controlling the fluctuations of the lathe armature due to the increase of the inertia characteristics of the machine and the reduction of the oscillation amplitude of the tool, can improve the accuracy of machining and roughness of the processed surface of the component at higher spindle speeds.
Authors and Affiliations
Yu. V. Shapoval, V. O. Zaloga
Keywords
Related Articles
- EP ID EP261939
- DOI -
- Views 118
- Downloads 0
Feasibility study of choosing the diameter of borehole charges for drilling and blasting operations in quarries
It has been established that the issue of choosing the effective diameter of the downhole charge of an explosive for the destruction of rock formation in quarries has not been fully investigated. Existing methods for cal...
Study of the state of forest resources of zhytomyr region
The state of forest fund is studied; the volume of forest use and reforestation in the region was analyzed, resources of Zhytomyr region is investigated in this work; the structure of the forest, the main reasons for uns...
Stress strain analysis for the face milling cutter to achieve a proper surface finish
According to an analysis of published works by the authors who investigated the process finishing machining operations the parts by the face milling cutter, the feasibility of using face milling processes for the final f...
Mathematical model of the interaction of the near field of a coaxial sensor with a layered environment
The article investigates the design of coaxial sensors for microwave studies of the composition of matter. The peculiarities of the use of near-field microwave sensors for studying the composition of matter are considere...
Improvement of construction and technology of manufacture car suspension ball bearing
The necessity of improvement of spherical articulated joints is proved on the example of a ball bearing of a forward suspension bracket of a car. The purpose of the work is to improve the design and technology of manufac...