IN-SERVICE ABRASION RESISTANCE EXAMINATIONS OF METAL SHEET LININGS USED IN THE BUCKET WHEEL FOR THE SRs 1200 WHEEL EXCAVATOR
Journal Title: Tribologia - Year 2011, Vol 238, Issue 4
Abstract
This paper compares the abrasion resistance (values) of metal sheets forming a rotating chute of the bucket wheel in the wheel excavator operating in a brown coal mine. Six different types of metal sheets, including three types of the padded sheets, were examined while mounted on the same bucket wheel. The in-service examinations lasted for 800 hours and were performed in winter. The metal sheet wear was determined by means of the weight and linear methods measuring a decrease in the thickness in the selected points according to the marked measuring grid. It allowed a profile of the sheet wear in the crosswise and lengthwise sections to be determined. It was found that the metal sheets padded with powder wires CS 400 and DPIS 91 showed the highest abrasion resistance values. The application of those metal sheets as the rotating chute lining can limit the number of replacements to one or two replacements per year instead of three or four experienced in case of 30G2 steel.<br/><br/>
Authors and Affiliations
Stanisław Nosal, Jacek Hernes
Keywords
Related Articles
- EP ID EP271500
- DOI -
- Views 52
- Downloads 0
INFLUENCE OF THE DISPERGATION CONDITIONS OF MONTMORYLONITE IN EPOXY RESIN ON THE MECHANICAL PROPERTIES AND MORPHOLOGY OF NANOCOMPOSITES
The paper presents of the investigation of mechanical properties and morphology of epoxy matrix nanocomposites. Montmorylonite (MMT) Closite 30B was used as aluminosilicate nanofiller. It has been found that presence of...
TRIBOLOGICAL PROPERTIES OF ACRYLONITRILE- -BUTADIENE RUBBER COMPOSITES CONTAINING CARBON NANOTUBES
The influence of carbon nanotubes addition on tribological properties of elastomer composites was studied. Butadiene-acrylonitrile rubber (NBR) composites containing 1-5 phr of multiwall carbon nanotubes (MWCNT) and cure...
EXPERIMENTAL STUDIES ON PSEUDOPLASTIC AND THIXOTROPIC PROPERTIES OF LITHIUM GREASES WITH ATR -FTIR SPECTROSCOPY
The paper deals with experimental studies on pseudoplastic and thixotropic properties of lubricating greases with ATR-FTIR spectroscopy. The research was done on lithium greases thickened by lithium 12-hydroxystearate wi...
INVESTIGATION OF FRICTION AND WEAR MECHANISMS OF PVD-TiAlN COATED CARBIDE AGAINST Ti6Al4V TITANIUM ALLOY USING A PIN-ON-DISC TRIBOMETER
In this paper, the tribological behaviour of the TiAlN coated carbide inserts in dry sliding against Ti6Al4V titanium alloy was investigated. A pin-on-disc device was used to record both the friction coefficient and the...
INFLUENCE OF FILLERS ON THE RHEOLOGICAL PROPERTIES OF THEIR COMPOSITIONS WITH LUBRICATING GREASES
The paper presents the results of studies on the influence of fillers, introduced into lubricating greases, on the rheological properties of resultant grease compositions. These fillers were graphite and PTFE powders. Th...