ANALYSIS OF THE VALUES OF HYDRODYNAMIC PRESSURE AND LOAD CARRYING CAPACITIES FOR VARIOUS METHODS OF SOLVING A REYNOLDS TYPE EQUATION
Journal Title: Tribologia - Year 2018, Vol 280, Issue 4
Abstract
Calculations of the hydrodynamic pressure distribution in the slide bearing gap occur most often on the basis of ready-made computer programs based on CFD methods or one’s own calculation procedures based on various numerical methods. The use of one’s own calculation procedures and, for example, the finite difference method, allows one to include in the calculations of various additional non-classical effects on the lubricant (e.g., the influence of the magnetic field on ferrofluid, the influence of pressure or temperature on viscosity changes, non-Newtonian properties of lubricant or various non-classical models of dynamic viscosity changes). The aim of the authors’ research is to check how large the differences in results may be obtained using the two most frequently used methods of solving a Reynolds type equation. In this work, the authors use the small parameter method and the method of subsequent approximations to determine the distribution of hydrodynamic pressure. For numerical calculations, the finite difference method and our own calculation procedures and Mathcad 15 software were used. With both methods, identical conditions and parameters were assumed and the influence of pressure and temperature on viscosity change was taken into account. In the hydrodynamic pressure calculations, a laminar flow of the lubricating liquid and a non-isothermal lubrication model of the slide bearing were adopted. The classic Newtonian model was used as a constitutive equation. A cylindrical-type slide bearing of finite length with a smooth pan with a full wrap angle was accepted for consideration. In the thin layer of the oil film, the density and thermal conduction coefficient of the oil were assumed to remain unchanged.<br/><br/>
Authors and Affiliations
Andrzej MISZCZAK, Krzysztof WIERZCHOLSKI
Keywords
Related Articles
- EP ID EP414833
- DOI 10.5604/01.3001.0012.7532
- Views 58
- Downloads 0
TRIBOLOGY OF CARBON COATINGS AT ELEVATED TEMPERATURE
The paper presents the results of the mechanical and tribological coatings of carbon a-C, a-C:H and a-C:N coatings. The hardest coatings H = 17 GPa is a non-hydrogenated a-C coating, while the softest one is a-C:H - 7 GP...
Możliwości sterowania siłą tarcia za pomocą prądu elektrycznego przepływającego przez strefę tarcia
Niniejsza publikacja przedstawia sposób sterowania siłą tarcia za pomocą prądu elektrycznego przepływającego przez strefę tarcia. Największe zmiany siły tarcia pojawiają się podczas występowania intensywnych zjawisk trib...
MODELLING AND ANALYSIS OF ROTATING SYSTEMS WITH GAS FOIL BEARINGS UNDER TRANSIENT OPERATING CONDITIONS
Gas foil bearings are on the cutting edge of bearing systems that spread worldwide. Although it is a common practice to apply such systems to high-speed fluid-flow machinery, their modelling and analysis still pose a num...
STATIC AND DYNAMIC CHARACTERISTICS OF THE POLYMER COMPOSITES CONTAINING DISPERSED POLYTETRAFLUORETHYLENE
The paper presents the results of static and dynamic friction force measurements for metal-polymer regeneration composites obtained in a reciprocating motion. The composite matrix was epoxy resin filled with iron powder,...
A 3D ANALYSIS OF GEOMETRICAL SURFACE STRUCTURE IN TRIBOLOGICAL TESTS