STATIC AND DYNAMIC CHARACTERISTICS OF THE POLYMER COMPOSITES CONTAINING DISPERSED POLYTETRAFLUORETHYLENE
Journal Title: Tribologia - Year 2015, Vol 260, Issue 2
Abstract
The paper presents the results of static and dynamic friction force measurements for metal-polymer regeneration composites obtained in a reciprocating motion. The composite matrix was epoxy resin filled with iron powder, and a solid lubricant – polytetrafluoroethylene – tarflen obtained by suspension method. The composites with various quantitative contents of polytetrafluoroethylene (PTFE) 5, 10 and 15% were prepared. The composites were cross-linked at room temperature. The static and dynamic friction coefficient of composite-steel tribosystems was measured by means of a special test rig with a tribosystem adapted for sliding friction investigation under reciprocation motion. Using the elaborated methodology the stick-slip phenomena occurred in the investigated tribosystems was analysed. The measurements were performed under various unit pressures typical for the sliding guides in cutting machines (0.1, 0.5, 1.0, 1.5, 2.0 MPa). As a reference the static and dynamic characteristics of the steel – steel tribosystem was investigated. On the basis of obtained test results, it was concluded that polytetrafluoroethylene used as a friction modifier improves the tribological properties of the composite. The composite-steel tribosystem shows lower static friction coefficient and reduced stick-slip phenomena than conventional steel-steel tribosystem.
Authors and Affiliations
Zbigniew PAWELEC, Piotr KOWALEWSKI
Keywords
Related Articles
- EP ID EP258907
- DOI -
- Views 42
- Downloads 0
Wpływ stanu energetycznego warstwy wierzchniej na zwilżalność stopu aluminium EN-AW Almg2 aktywnymi i nieaktywnymi substancjami smarującymi
W artykule przedstawiono wpływ stanu energetycznego warstwy wierzchniej stopu aluminium na jej zwilżalność aktywnymi i nieaktywnymi powierzchniowo substancjami smarującymi. Stan energetyczny oceniano na podstawie analizy...
METHODS AND TEST RIG FOR THE BACK-TO-BACK TESTING OF FRICTION AND WEAR OF SPUR GEARS
Finding the effect of a new type of a lubricating oil (e.g. ecological one) or a new way of the tooth flank modification (e.g. by deposition of a thin, low-friction coating) on the life of gears is possible only experime...
Wzdłużne pole magnetyczne w szczelinie poprzecznego łożyska ślizgowego
W pracy autorzy przedstawiają analityczno-numeryczną metodę wyznaczania składowych wektora natężenia pola magnetycznego w szczelinie walcowego łożyska ślizgowego. Zagadnienie to staje się istotne, gdy jako czynnik smarow...
THE STRUCTURE AND PROPERTIES OF IRON ALLOYS WITH VARIOUS CHEMICAL COMPOSITIONS AFTER DIFFUSIONAL BORONIZING
The purpose of the paper was to test how the content of carbon and alloying elements in steels influence the structure and properties of boronized layers. The following grades of steels were used during the tests: C45, C...
THE STUDY OF THE INFLUENCE PROCESSING PRESSING ON THE ELASTIC-PLASTIC PROPERTIES OF SPHEROIDAL FERRITIC CAST IRON
This paper presents the results of the study of elastic-plastic properties that conditioned the strength of pressing spheroidal ferric cast iron. Investigations showed that the strength of pressing influenced the improve...