INCREASING OF WEAR RESISTANCE OF CUTTING EDGES BY COMBINED TREATMENT METHOD
Journal Title: Проблеми тертя та зношування - Year 2017, Vol 75, Issue
Abstract
The wear resistance of the operating surfaces of the cutting parts that been restored by com-bined treatment method which includes preliminary chemical-thermal saturation in powder mixtures and electric contact deposition of the achieved material under rational regimes is investigated. The effect of the powder mixture composition for the saturation of the surfacing tape on the distribution of the structural components and on it’s penetration depth in deposit-ed layer is explored. The influence of the structural components distribution in the deposited layer on the magnitude and the duration of the deterioration of the restored surface by the combined treatment method is investigated. It is determined that significant rise of the wear resistance of restored by combined treatment method surfaces is due to presence of the solid solution in the structure of deposited layer and to it’s subsequent hardening while the electric contact surfacing.
Authors and Affiliations
V. А. KORSUN, О. V. BEREZSHNAYA, V. D. KUZNETSOV
Keywords
Related Articles
- EP ID EP324431
- DOI -
- Views 49
- Downloads 0
OPTIMIZATION OF THE MAIN PARAMETERS IN DESIGN OF DOUBLE STAGE SPUR GEARS SPEED REDUCERS
The dependence of the choice of the basic parameters of a two-stage cylindrical gearbox exe-cuted according to the expanded scheme from the optimal distribution of transmission num-bers of high-speed and slow-moving stag...
ANALYTICAL EVALUATION OF LIMIT VALUES OF FRICTION FACTOR DURING BURNISHING WITH METAL-CONTAINIING LUBRICANT
The theoretical research of the interaction the surface with deforming tool parts at burnishing with metal-containing lubricant, which is effective for the treatment of parts made of titanium alloys, is described in the...
THE ESTIMATE OF AMPLITUDE OF RESONANCE OSCILLATIONS OF TOOTH GEAR WITH ASYMMETRIC FUNCTION OF TRANSMISSION RATIO FROM THE ROTOR VIBRATION
The estimate of amplitude of resonance oscillations from the rotor vibration of tooth gear with asymmetric function of transmission ratio is submitted, the analytic dependences for valuation of amplitude of critical osci...
TRIBOLOGY COMPATIBILITY OF STEEL AND CAST IRON IN ABRASIVE AND CORROSIVE ENVIRONMENT IN THE PRODUCTION OF BIOMASS BRIQUETTES
This article presents an idea of biomass compression that causes corrosive and abrasive wear on screw presses (sunflower husk, sawdust and straw). The present method allows determining the force of friction and wear rate...
ORTHOGONAL SPUR-BEVEL TRANSMISSIONS
Half-involut orthogonal spur-bevel transmissions formed by involute spur gear wheel, have increased sensitivity to errors of manufacturing and assembling in the case of a linear touched links. In the case of contact loca...